07.F5.A1D-3B-A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F5.A1D-3B-A is part of the F5 Combivert Axis Drives series and features a rated power of 0.75 kW and a rated current of 2.6 A. This drive supports 3-phase 400 V AC input supply, has 29 control terminals, and is built with a standard control board and IP20 enclosure. It provides 8 digital inputs, 2 analog inputs, and 2 relay outputs, with a peak current of 4.7 A and installed braking transistor.
Internal Product Review
The 07.F5.A1D-3B-A is a KEB Combivert F5 axis drive rated at 0.75 kW with a 3-phase 400 V AC input. A standard control board and 1 ms I/O scan time support responsive machine control and smooth integration in automated equipment. IP20 enclosure protection and an integrated braking transistor make the drive a strong choice for dependable panel-based motion control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.A1D-3B-A drive is manufactured by KEB for the F5 Combivert Axis Drives series. It modulates AC power to control the torque and speed of connected motors in packaging lines, material-handling axes, and other automation cells. Supplied in housing size D, the device incorporates a standard control board and an integrated braking transistor that routes excess kinetic energy to a resistor bank during fast stops. Twenty-nine control terminals are provided for logic, encoder, and fieldbus signals, allowing the drive to act as the primary axis interface inside an IP20 control cabinet.
Electrical sizing starts with a continuous output of 0.75 kW, matching small kilowatt-class servomotors and pumps. At rated load, the inverter delivers 2.6 A of sinusoidal current, while transient overloads can be supplied up to 4.7 A for acceleration or disturbance rejection. The power section is fed from a three-phase 400 V AC power supply, eliminating the need for step-down transformers in European industrial power systems. Cycle-by-cycle computation of speed, current, and position references is completed within a programmable scan of 1 ms, so the drive can follow motion setpoints with minimal latency in high-throughput machinery.
The enclosure meets IP20 ingress protection, making the unit suitable for clean, ventilated switchgear compartments while keeping internal conductors finger-safe. Gate-drive electronics support carrier frequencies up to 16 kHz, allowing users to balance acoustic noise against switching losses. The 8 digital inputs accept 24 V commands for functions such as enable, jog, or limit sensing. Drive status is returned through 2 relay outputs that can report normal operation or a fault to upstream safety relays. Two analog inputs and two analog outputs supplement the field wiring, and the compact 90 × 250 × 181 mm outline eases installation in crowded machine panels.
