07.F5.M1D-2BGA KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F5.M1D-2BGA is part of the F5 Combivert Axis Drives series and features a rated motor power of 0.75 kW with a rated output current of 4 Amps. It comes with an integrated EMC filter, IP20 enclosure, and supports an input supply of 3-phase 230 V AC/DC. The drive includes a braking transistor and has a peak output current of 7.2 Amps.
Internal Product Review
The 07.F5.M1D-2BGA is a KEB Combivert F5 axis drive with 0.75 kW rated motor power and 4 A rated output current. An integrated EMC filter and C1 EMC class make panel integration especially clean and technically well suited for controlled industrial environments. The built-in braking transistor and 16 kHz rated switching frequency are strong advantages for responsive, smooth motion performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.M1D-2BGA axis drive is produced by KEB as part of the F5 Combivert Axis Drives series. It is intended to regulate speed and torque on three-phase induction or synchronous motors used in machine tools, packaging lines, material-handling cells, and other equipment that needs controlled acceleration and repeatable speed regulation. By converting a fixed mains supply into a variable output, the drive supports precise closed-loop motion when it is connected to an external controller and motor feedback, giving the cabinet a compact single-axis motion-control stage for automated equipment.
The housing measures a depth of 221 mm, a width of 90 mm, and a height of 285 mm, so the unit fits a narrow vertical space inside a standard control panel and leaves room for adjacent components. An enclosure rating of IP20 shields live parts from accidental contact and relies on the host cabinet for airflow. The power section operates from a 3-Ph 230 V AC/DC input and uses an IGBT bridge, while an integrated EMC filter with C1 emission class helps limit conducted noise. The front face carries TTL D-Sub 15-pin and 9-pin encoder ports for incremental feedback, and a factory-installed braking transistor handles regenerated energy while the inverter supplies a continuous 4 A to the motor windings and keeps the encoder connections accessible from the front of the panel.
The permissible ambient spans −10 °C to 45 °C in service and −25 °C to 70 °C in storage, allowing the drive to remain installed during transport and seasonal temperature changes without immediate removal from the machine. During short acceleration peaks it can deliver 7.2 A, giving machines extra torque without oversizing the power stage. Motor selection is supported by a nominal coupling capacity of 0.75 kW, which suits compact axis duties where moderate continuous output is required. The inverter modulates its output at a carrier frequency of 16 kHz, which lowers audible switching noise and improves current control in low-inductance stator windings.
