07.F5.H3D-ZB0B KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 07.F5.H3D-ZB0B is part of the F5 Combivert Axis Drives series and features analog current input of 0 to ±20 mA and analog voltage input of 0 to ±10 V. The drive offers a switching frequency of 16 kHz, includes a braking transistor and EMI filter, and has an input supply of 230 V AC or AC/DC. It supports incremental TTL encoder interface and has a torque accuracy of less than 3% MN.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.H3D-ZB0B is an AC drive built by KEB for the F5 Combivert Axis Drives series. Acting as the interface between motion controllers and three-phase motors, the unit modulates voltage and frequency so automated equipment maintains commanded speed and torque. It is suited for cabinet-mounted packaging, conveying, and general processing lines where stable closed-loop regulation is required.
On the power side, the drive accepts 230 V AC or AC/DC input, allowing direct connection to common industrial mains. For analog set-point control, it provides a differential voltage channel rated at 0…±10 V and a current channel spanning 0…±20 mA / 4…20 mA, so PLCs can send precise speed or torque commands without extra signal conversion. A carrier switching frequency of 16 kHz modulates the output stage, which helps reduce audible motor noise and improves current waveform quality at low speeds.
Fast coordination is achieved with an I/O scan time of 1 ms, refreshing digital references during each control cycle. Regenerative energy during deceleration is routed through the integrated GTR7 braking transistor, and motor position feedback enters through an incremental TTL encoder interface for accurate velocity regulation. Torque production stays within <3 % MN, supporting processes that require repeatable tension or pressure while maintaining consistent drive response.
Wake Industrial can arrange same-day shipping when time is critical. Quotes for this drive remain valid for 30 days, which helps buyers coordinate approvals and downtime planning. Customers may use the chat tool available on the website for questions about fault codes or general specifications.
Frequently Asked Questions about 07.F5.H3D-ZB0B:
Q: What types of analog current input does the 07.F5.H3D-ZB0B Combivert F5 axis drive support?
A: This drive accepts analog current inputs ranging from 0 to ±20 mA or 4 to 20 mA.
Q: What kind of encoder interface does the 07.F5.H3D-ZB0B drive use?
A: The encoder interface is an incremental TTL type and is connected via a terminal connector.
Q: Which braking transistor is installed in the 07.F5.H3D-ZB0B Combivert F5 drive?
A: A braking transistor type GTR7 is included with this drive.
Q: What are the supply voltage requirements for the 07.F5.H3D-ZB0B drive?
A: The supply input for this drive can be either 230 V AC or AC/DC.
Q: What input logic types are supported by the 07.F5.H3D-ZB0B axis drive?
A: This model has an input logic compatible with both PNP and NPN.
