07.F5.A1D-3BDA KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 07.F5.A1D-3BDA is an axis drive from the F5 Combivert Axis Drives series with a rated motor power of 0.75 kW and a rated output power of 1.8 kVA. This air cooled unit features a standard control board, operates with a 3-phase 400 V input, and includes an IP20 rating. The drive comes equipped with a braking transistor and an LCD operator interface with Serial/CAN and peak output capabilities.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F5.A1D-3BDA axis drive is produced by KEB and belongs to the F5 Combivert Axis Drives series. It is delivered with a standard board control section and uses the D configuration for its internal I/O arrangement. Within an automation cell, the unit converts fixed-frequency mains power into regulated output for a single motor, allowing the motion controller to apply precise speed and torque profiles for positioning, conveying, or process synchronization tasks. This arrangement supports closed-loop machine duties where one drive must respond quickly to changing command values. The unit is intended for compact installations that require repeatable acceleration and stable speed regulation.
The power section accepts a 3-phase 400 VAC/DC input. Under nominal conditions, it can supply a motor with 0.75 kW of mechanical power through a continuous output current of 2.6 A. The corresponding apparent output is 1.8 kVA, and the internal IGBTs switch at 16 kHz to support smooth inverter operation with reduced audible motor noise. This electrical sizing suits compact axis applications that need stable output without unnecessarily increasing cabinet demand. The switching frequency also helps balance motor sound levels with inverter heat generation during continuous operation.
For short dynamic demands, the inverter can reach an overcurrent of 216% of nominal, and a maximum short-time output of 4.7 A is available before thermal rollback begins. Cabinet integration is supported by the IP20 housing, and the recommended line fuse is 16 A. Additional protection includes an OC tripping point of 5.6 A and a programmed short-time current limit of 180%. Cooling is forced air across the heat sink, and a factory-installed braking transistor dissipates regenerated energy during deceleration. The braking transistor helps control bus voltage when the motor feeds energy back to the drive. An LCD operator panel with serial and CAN connectivity provides parameter access and displays peak output values for setup and diagnostics.
Frequently Asked Questions about 07.F5.A1D-3BDA:
Q: What type of cooling does the 07.F5.A1D-3BDA Combivert F5 drive use?
A: The 07.F5.A1D-3BDA drive uses an air-cooled system for thermal management.
Q: What type of input connection does the 07.F5.A1D-3BDA require?
A: This drive is rated for a 3-phase 400 VAC/DC input connection.
Q: What installed accessory is included with the 07.F5.A1D-3BDA drive?
A: The 07.F5.A1D-3BDA features a built-in braking transistor as an installed accessory.
Q: What is the rated motor power of the 07.F5.A1D-3BDA?
A: This model provides a rated motor power output of 0.75 kW.
Q: What is the IP rating for the 07.F5.A1D-3BDA drive?
A: The drive has an IP20 protection rating, indicating limited protection against dust and no protection against water.
