Product Description:

The 07.F5.A1A-3E2F is an AC inverter drive from KEB’s F5 Combivert Axis Drives series. It regulates speed and torque between a three phase mains source and an induction motor for conveyors, small pumps, and general automation equipment. KEB equips this version with a standard control board, allowing machine builders to keep a familiar control structure when similar axes are used in the same system.

The drive accepts 400 V AC across three phases and can supply motor power up to 0.75 kW. A peak line current of 4.7 A supports short acceleration or load transients without immediately forcing derating. The output stage can switch as high as 16 kHz, which helps reduce audible motor noise. One analog input, one analog output, and five digital inputs let a PLC handle run, jog, reference, and fault reset functions.

Continuous operation is based on a rated current of 2.6 A, and the control section works with a 1 ms scan interval for responsive signal handling. Logic power comes from a 24 V DC auxiliary supply, so stored parameters and communication can remain active during mains interruptions. With 3 encoder inputs plus relay and transistor outputs, the inverter can process feedback signals and report operating states through the control terminals.

Wake Industrial stocks this drive for fast order processing. Same day shipping can be arranged when timing is critical. Quotations remain valid for 30 days, giving purchasing teams more time to compare budgets, review requirements, and complete approvals for internal capital plans.