Product Description:

The 05.F5.CDB-ZM00 is an axis drive module produced by KEB and placed within the F5 Combivert Axis Drives series. As a closed-loop power stage, it modulates supply voltage to match real-time motor torque and speed commands, allowing coordinated multi-axis systems, indexing tables, and packaging machines to run with deterministic profiles. In addition to motor control, the module integrates local I/O so a higher-level PLC can collect process variables and issue reference values through the same enclosure.

The analog section offers two inputs with 11-bit resolution, each refreshed every 2 ms, so torque or speed setpoints enter the controller with low latency and fine quantization. Two analog outputs share a second-order reconstruction filter at 178 Hz, are produced by a 12-bit converter, and ride on a pulse-width carrier of 3.4 kHz that the downstream amplifier demodulates without audible artifacts. These outputs can drive ±10 V servovalves or drive following-error meters, while a fixed 10 VDC, 4 mA reference output powers potentiometers. No encoder feedback card is fitted, which leaves the slot open for optional fieldbus communication.

Digital resources include 8 opto-isolated inputs scanned every 1 ms, enabling the drive to process limit switches, start and stop commands, or fault acknowledgments without external relays. Two transistor outputs share a current budget of 50 mA total and can pulse status lamps or drive enable lines, while two relay outputs rated at 30 VDC and 1 A provide galvanically separated contacts for motor brakes or safety circuits. The integrated power stage is sized for 0.37 kW, making the module suitable for fractional-horsepower conveyors, feed rollers, and small winding stations. This arrangement keeps signal handling and switching functions in one housing, which reduces cabinet wiring.