05.F5.CBB-YA00 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 05.F5.CBB-YA00 drive is part of the F5 Combivert Axis Drives series and operates with a 400 V AC/DC input supply. It offers 8 digital inputs with PNP/NPN logic, two 12-bit analog inputs, two analog outputs at 11-bit resolution, and two relay outputs rated at 30 VDC and 1 amp. The unit features a carrier frequency of 8 kHz and has an I/O scan time of 2 milliseconds.
Internal Product Review
The 05.F5.CBB-YA00 is a KEB Combivert F5 axis drive built for responsive motion control with 400 V AC/DC input and an 8 kHz carrier frequency. A 2 ms I/O scan time and PNP/NPN digital input logic support clean integration and fast signal handling in automated equipment. The 12-bit analog input resolution and 11-bit analog output resolution make the unit a strong choice for precise, dependable axis control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 05.F5.CBB-YA00 is an axis drive produced by KEB for the F5 Combivert Axis Drives series. As a field-oriented inverter, it accepts three-phase power and modulates the voltage and frequency delivered to synchronous or induction motors, providing closed-loop speed and torque control for conveyors, winders, and positioning systems in automated lines. This model operates from a nominal supply of 400 V AC/DC and switches its IGBTs at a carrier frequency of 8 kHz to limit motor current ripple while keeping switching losses moderate.
Two analog inputs are sampled with 12-bit precision, allowing proportional speed or torque commands, while two analog outputs provide status feedback with 11-bit resolution. The unit has eight digital inputs, and their channel logic can be configured for PNP or NPN sensing. Discrete I/O is refreshed every 2 ms, allowing sequence reactions to remain synchronized with fast PLC scans. Wiring connects to 29 control terminals, providing access to the command, monitoring, and switching signals required for machine integration. The control interface also includes two digital outputs with a combined load limit of 50 mA and two isolated relay outputs with changeover contacts. These connections allow the drive to exchange operating commands, state information, and fault signals with an external controller without requiring a separate basic I/O module.
The overcurrent trip activates at 216% of rated current, protecting the power stage during severe overload conditions. The unit can also support a short-term load of up to 180% of rated current without opening the drive contactor, allowing brief acceleration or peak-torque demands. The relay contacts can switch field devices rated up to 30 VDC at 1 A, providing isolated control for equipment such as contactors or fault lamps. No encoder feedback card is installed, so applications requiring direct velocity or position feedback must use an external feedback module. The housing uses form factor code B, which establishes the physical enclosure arrangement for installation in distributed motion cabinets. Its analog, digital, and relay connections support direct integration with PLC-controlled machinery while keeping command and status wiring on the drive’s control terminals.
