05.F5.C1B-3B0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 05.F5.C1B-3B0A is part of the F5 Combivert Axis Drives series and features a 3-phase 400 V AC/DC input supply with an integrated braking transistor. This compact control type drive provides 8 digital inputs, a digital output current of 50 mA total, and a 12-bit analog input resolution. It supports a rated switching frequency of 16 kHz and includes an internal 24 V DC supply.
Internal Product Review
The 05.F5.C1B-3B0A is a KEB F5 Combivert axis drive with compact control and a 3-phase 400 V AC/DC input supply. A 2 ms I/O scan time and 16 kHz rated switching frequency support responsive, smooth control in fast-moving automation applications. A very capable drive for efficient machine integration and consistent performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 05.F5.C1B-3B0A axis drive is produced by KEB and belongs to the F5 Combivert Axis Drives series. As a compact controller for asynchronous or servo motors, it forms part of closed-loop motion systems found in packaging lines, material handling conveyors, and general machinery. The unit regulates speed, torque, and position by converting the incoming three-phase mains into a pulse-width-modulated output that matches the motor’s requirements and supports multi-axis architectures.
Electrical interfacing begins with a 3-phase 400 V AC/DC supply that feeds an internal control voltage stage, and that stage provides a stable 24 V DC rail while also accepting an external 24 V feed when redundant control power is required. The control section is classified as Compact and completes one full I/O scan in 2 ms, allowing precise reaction to field signals. Twenty-nine terminal points accommodate eight digital inputs, an analog channel with 12-bit resolution, and open-collector digital outputs. Switching events on the inverter leg are modulated at 16 kHz, limiting audible noise while maintaining motor current fidelity. Dynamic stopping energy is handled by the factory-installed braking transistor type GTR7, eliminating the need for an external brake chopper.
The digital output stage can sink up to 50 mA total, a limit adequate for status lamps or small relays. During high-demand moves, the inverter can deliver up to 180% of rated current for short bursts, and overcurrent protection trips at 216% to safeguard both the drive and the motor. A form-C relay rated at 30 VDC / 1 A offers an isolated fault or drive-ready contact for system controllers. These limits and reporting paths support controlled operation during peak demand and provide deterministic status feedback to the machine PLC for supervisory logic.
