05.F5.C1B-2B0A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 05.F5.C1B-2B0A drive is part of the F5 Combivert Axis Drives series and features a supply voltage of 230 V AC with support for 1- or 3-phase AC input. It has a rated power of 0.37 kW, a rated current of 2.3 A, and a maximum current of 5 A. This device includes 8 digital inputs, 2 analog inputs and outputs, 2 relay outputs, and comes with an IP20 enclosure.
Internal Product Review
The 05.F5.C1B-2B0A is a KEB Combivert F5 axis drive with a 230 V AC supply and 0.37 kW rated power. An IP20 enclosure and an integrated braking transistor support clean cabinet installation and dependable deceleration control. Fast 2 ms I/O scan time makes the unit a strong choice for responsive motion applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 05.F5.C1B-2B0A axis drive is produced by KEB within the F5 Combivert Axis Drives series. The unit functions as a speed and torque controller for small AC motors used in conveyors, pumps, or positioning modules inside automated machinery. By converting fixed line power to a variable output, the drive enables closed-loop regulation and includes built-in braking transistor support for regenerated energy. This places the device between higher-level control systems and the motor load while allowing the drive to respond quickly to changing operating conditions.
Electrically, the drive is supplied at 230 V AC, and it delivers a continuous shaft power of 0.37 kW. Under nominal conditions, the inverter outputs 2.3 A, and during short transients it can furnish up to 5 A for accelerating inertia or overcoming load spikes. The internal IGBT bridge supports a carrier frequency selectable to 16 kHz, which helps smooth motor current and reduce audible noise. Power stage operation is monitored by thermal sensors, while the preinstalled braking transistor routes regenerated energy to an external resistor to keep the DC link voltage within acceptable limits.
Parameter updates propagate through the control board every 2 ms, keeping the field-oriented control routine aligned with incoming machine feedback. Eight digital inputs, two relay outputs, two transistor outputs, and two analog channels in each direction allow the drive to interface with switches, references, and process signals without external I/O modules. The housing has an IP20 rating, so it is intended for installation inside a protected cabinet. The frame is 90 mm wide, with a depth of 200 mm and a height of 249 mm, which supports compact DIN rail layouts. Operation from single-phase or three-phase AC supplies allows the unit to be used in installations where either supply type is available.
