Product Description:

The 05.F5.B0A-PM00 is an axis drive module manufactured by KEB and positioned within the F5 Combivert Axis Drives series. Designed for cabinet installation, the inverter converts fixed-frequency line power into a variable three-phase output, enabling closed-loop speed and torque control of low-power motors in packaging lines, small conveyors, and auxiliary machine axes. Its integrated control electronics and power stage form a compact subsystem that simplifies wiring and parameter setup in modular automation cells.

The drive connects to a nominal 230 V, three-phase supply that may fluctuate between 180–260 V AC; within this window the input draws a rated 4.6 A at a line frequency of 50/60 Hz (±2%). Internally, the rectifier and IGBT bridge synthesize a symmetrical pulse-width-modulated output of up to 3 × 255 V, delivering a continuous apparent power of 0.9 kVA and a rated motor current of 2.3 A. These values show the maximum steady electrical load the unit can sustain without thermal derating. For short acceleration bursts, the current may rise to 4.1 A, giving additional torque headroom until the thermal model reduces excitation. The output leaves the drive on three isolated phases for direct connection to the motor terminals.

Mechanical and protective ratings align with small-frame motors up to 0.37 kW, a value that matches the unit’s inverter silicon and heat-sink capacity. Under full load, the electronics dissipate only 30 W, allowing forced-air cooling inside IP20 control enclosures; overall weight is 1.1 kg, so cabinet mounting places minimal stress on DIN rail or panel hardware. Circuit protection is coordinated through a 16 A line fuse and an overcurrent trip threshold of 5 A. Environmental service is covered by climatic category 3K3, and the IP20 enclosure suits pollution-degree-2 indoor zones. No encoder feedback card is installed, so open-loop or sensorless vector algorithms are selected through Combivert parameters.