05.F5.B0A-690A KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 05.F5.B0A-690A is part of the F5 Combivert Axis Drives series and operates on a single-phase 230 V AC input supply. It features a standard cooling method, a maximum short-time current of 180%, and a switching frequency of 4 kHz. The drive is varnished and has no encoder interface.
Internal Product Review
The 05.F5.B0A-690A is a KEB Combivert F5 axis drive built for dependable motion control on 1-phase 230 V AC input. Standard cooling and a varnished finish support clean cabinet integration and long service life in industrial settings. A 180% max short-time current stands out as a strong performance advantage for demanding axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 05.F5.B0A-690A is an axis inverter from KEB in the F5 Combivert Axis Drives series. The device is intended to control motion in industrial automation by acting as the link between a plant's 230 V supply and the motor windings. Inside a control cabinet, it converts line power into a pulse-width-modulated output for precise velocity and torque regulation on conveyor, packaging, and material-handling axes. Its role is to modulate electrical power so the connected motor can respond smoothly to changing load demands and commanded speed changes.
The drive accepts a single-phase input of 1-Ph 230 V AC, allowing it to operate from standard facility power without a three-phase source. Internally, insulated-gate bipolar transistors switch at 4 kHz, which balances motor acoustics with semiconductor heating during normal operation. During rapid acceleration, output current can rise to 180% of the continuous rating for a short period, helping the axis overcome inertia and momentary load peaks. Protective circuitry trips at 216% to help prevent damage to the drive or motor if current demand becomes excessive. Heat is removed by standard cooling, which relies on surrounding control-cabinet airflow rather than a dedicated fan assembly. This arrangement keeps the thermal design straightforward while supporting typical cabinet installations.
The drive has no encoder interface, so it is suited to applications that use open-loop V/Hz or sensorless vector control instead of motor feedback. The power section includes varnished electronics, which help protect the boards from moisture and conductive dust inside the enclosure. This makes the unit a practical choice for installations where direct position feedback is not required and the control method is based on motor characteristics rather than an external encoder. The coated electronics also add protection in cabinets where airborne contamination could affect exposed circuit boards.
