Product Description:

The 00.F5.0C1-1050 feedback cable is supplied by KEB for the F5 Combivert Axis Drives series. As a dedicated connection component for resolver transducers, the assembly links a motor-mounted position sensor to the controller, allowing the drive to close its speed and angle loops accurately in automated machinery. By matching the pinout conventions of the Combivert F5 platform, the cable provides compatible feedback without requiring field modification.

The cable is classified as a resolver cable, meaning its individual pairs carry the analog sine and cosine signals produced by the rotating transformer inside the motor. At the motor end, the encoder plug is a 12-pole molded connector that mates directly with standard resolver sockets while maintaining a sealed connection. The drive-side termination is a 15-pole D-Sub plug, so the cable can be inserted into the feedback port of an F5 inverter without adapters. Continuous braid coverage connects to both shells, creating a housing-to-housing shield that suppresses electromagnetic noise along the full cable length. A dedicated protective conductor is assigned to pin 14, giving the ground reference a fixed and identifiable location within the D-Sub layout.

Phase identification relies on the color coding of the twisted pairs. The negative cosine lead is pink, and the positive cosine lead is gray, helping prevent cross-connections when the jacket is stripped. The sine channels follow the same arrangement, with red used for Sin− and blue used for Sin+. The reference excitation pair uses yellow for Ref− and green for Ref+, keeping the drive excitation conductors separate from the feedback channels. The cable fits compatible size A housings, allowing it to be routed through KEB’s slim motor connectors. No additional encoder feedback card is required because the assembly connects directly between the motor and inverter, reducing the number of components needed inside the panel.