00.F5.0C0-0009 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.F5.0C0-0009 is an adapter cable used in the F5 Combivert Axis Drives series. It features a female D-Sub 9-pole encoder plug and a male RJ45 inverter plug, with a length of 0.05 meters. The cable supports a UVW encoder interface and provides TTL auxiliary signal output.
Internal Product Review
The 00.F5.0C0-0009 is a well-designed adapter cable for KEB Combivert F5 axis drives, suited for clean encoder-to-inverter integration. The UVW encoder interface and TTL auxiliary signal output support accurate signal handling, making the adapter a strong choice for dependable drive feedback.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.F5.0C0-0009 is an encoder interface cable produced by KEB for the F5 Combivert Axis Drives series. It serves as the dedicated link between a motor-mounted feedback device and the inverter, carrying incremental position signals so the axis controller can maintain closed-loop speed and torque control in industrial automation cells. With factory-terminated connectors on both ends, the assembly avoids extra field termination and helps preserve shielding integrity across the feedback path. This type of short interface cable is typically used where the feedback connector on the motor must be adapted directly to the drive input without intermediate terminal points. Its short form factor keeps routing compact inside the control cabinet and reduces excess cable slack around nearby drive components.
The cable is classified as an Adapter, which means it changes connector style rather than serving as a long extension lead. Its overall length is 0.05 m, making it suitable for short cabinet connections where the drive and motor feedback interfaces are close together. On the encoder side, the connector is a D-Sub in a Female configuration with 9 poles. This layout matches common encoder interfaces and uses the familiar D-Sub jack-screw arrangement for secure retention.
At the inverter end, the feedback signals are carried as TTL level square waves in the UVW pattern used by the control system. These signals enter the drive through a RJ45 plug, which mates with the keyed port used on the control card. The pin assignment follows the grounding and shielding scheme used on the Combivert F5 platform, helping separate low-level feedback lines from nearby power conductors and maintain stable signal transmission during operation. Consistent shielding along this path helps the controller read encoder transitions cleanly during rapid axis movement.
