00.F5.0C0-0008 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.F5.0C0-0008 is part of the F5 Combivert Axis Drives series and features a 0.05 meter adapter cable. This cable includes a 15-pin female D-Sub encoder connector and a male RJ45 inverter connector, housed in size A housing for applications in automation systems.
Internal Product Review
The 00.F5.0C0-0008 is a KEB Combivert F5 adapter cable intended for axis drive signal interfacing. D-Sub encoder termination and RJ45 inverter termination make integration straightforward in matched drive systems. Compact construction makes this adapter a practical choice for clean, efficient panel wiring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.F5.0C0-0008 cable assembly is produced by KEB for the F5 Combivert Axis Drives series. It serves as the dedicated interface between the encoder feedback coming from a motor and the inverter inside a control cabinet, allowing position data to reach the drive without signal loss. By matching the mechanical coding and pin layout demanded by the drive, the adapter simplifies installation tasks in industrial automation where fast replacement and clear routing of feedback wiring are required.
The cable is specified as an Adapter, meaning its primary job is to translate between two different connector standards rather than extend distance. With an overall length of only 0.05 m, it is intended to remain inside the cabinet and avoid excess slack that could interfere with airflow or doors. On the encoder side the connection is a D-Sub interface; this rectangular shell supports dependable shielding around the signal lines. The shell is delivered with a Female insert, so a male mating plug on the feedback harness locks directly into place. Internally the insert carries 15 contact positions, matching the common pin allocation used by KEB encoder feedback channels for incremental and absolute signals.
On the inverter end, the short cord terminates in an RJ45 plug with a Male latch, aligning with the communication port molded into every drive of housing class A. This physical format ensures the adapter seats flush against the front panel and leaves neighboring terminals accessible. Because the wiring style adheres to the Combivert F5 conventions, installers do not need custom crimping or pin swaps when integrating new axes. The combined connector choices and housing designation help maintain clear segregation between power, data, and encoder bundles, reducing commissioning time and preventing cross-talk within densely populated enclosures.
