00.F5.060-5A11 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.F5.060-5A11 belongs to the F5 Combivert Axis Drives series and supports the CANopen DS301 and DS402 protocols. It provides bus termination with a 124 Ohm external resistor, a D-Sub 9-pole CAN connector, and has operator access via display and keyboard. This axis drive features safe disconnection per VDE0160 and supports both life guarding and node guarding functions.
Internal Product Review
The 00.F5.060-5A11 is a KEB Combivert F5 axis drive with CANopen DS301 (DS402) protocol support and ISO/DIS 11898 high-speed transmission. A D-Sub 9-pole CAN connector and 124 Ohm external bus termination make network integration straightforward and technically sound. The display and keyboard interface adds practical commissioning value, making this drive a strong choice for controlled axis applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.F5.060-5A11 is an axis drive manufactured by KEB for the Combivert F5 series. It couples an inverter stage with real-time bus processing so plant controllers can deliver precise velocity, torque, and position commands to synchronous or induction motors. By translating fieldbus telegrams into regulated output currents, the unit serves as a compact motion node for conveyors, pick-and-place stations, and packaging equipment that require coordinated multi-axis profiles.
Field communication is based on CANopen DS301 application objects on the ISO/DIS 11898 high-speed physical layer. The network plugs into a D-Sub 9-pole connector, and segment impedance can be matched with an external 124 Ω bus terminator when the drive is installed at a line end. Each process data frame carries up to 8 bytes, a size that balances deterministic exchange with low overhead. Life guarding and node guarding are available so the master can monitor node responsiveness, while fault handling is aided by a local buffer that accepts five error entries. These messages and all setup parameters are accessible through the built-in display and keyboard operator interface, allowing local review of status and settings without an external service tool.
A dedicated diagnostic jack X6B HSP5 streams raw bus traffic for analysis without disturbing motor wiring. During a fault, the unit broadcasts the emergency code 128 + Node-Id, allowing higher-level controllers to react immediately. Up to 5 entries remain stored in the error field until cleared, providing a chronological record of recent events for faster fault tracing. Internal power circuits are separated from control electronics through Safe disconnection per VDE0160, ensuring galvanic isolation that limits hazardous feedback and supports use in safety-related machine sections.
