14.F0.R11-3429 KEB
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
The KEB 14.F0.R11-3429 is part of the F0 Combivert Control Cabinets series and features a nominal motor power of 3 kW along with a rated output current of 7.5 Amps. It operates on a rated mains voltage of 400 V, with a maximum output frequency of 408 Hz and a protection rating of IP20. The cabinet weighs 4 kilograms and is suitable for mounting at altitudes up to 3000 meters.
Internal Product Review
The 14.F0.R11-3429 is a KEB F0 Combivert control cabinet designed for reliable drive service with 400 V rated mains voltage and 3-phase input. Rated output current of 7.5 A and maximum output frequency of 408 Hz give the unit strong control range for dynamic motor applications. A well-tuned cabinet for industrial panels, highlighted by 3 kW nominal motor power.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 14.F0.R11-3429 hardware module is produced by KEB within the F0 Combivert Control Cabinets series. It functions as a cabinet-mounted inverter that takes three-phase line power and delivers controlled variable-frequency output for induction or synchronous motors used in material handling, pumping, and general factory automation. The unit combines control, protection, and low-voltage interface circuits in a 4 kg rack for integration into multi-axis enclosures with centralized cooling and wiring. This layout keeps the drive electronics in one cabinet location and supports coordinated motor control without requiring a separate standalone inverter housing.
The inverter is designed for a three-phase supply at 400 V. Internal bus conditioning supports a continuous output of 7.5 A, which is equivalent to 5.2 kVA at the motor terminals. A maximum programmable frequency of 408 Hz allows oversynchronous operation for high-speed spindles without mechanical gear changes. Upstream protection relies on a 20 A mains fuse, and a separate 0.4 A control-circuit fuse isolates signaling electronics from power disturbances. These values set the electrical operating limits for the drive and the associated switchgear under rated load.
For compact drive applications, the unit can power machines up to 3 kW. It remains suitable for installation heights up to 3000 m and ambient temperatures not exceeding 45 °C. The housing is rated IP20, so the drive should be installed in a clean, ventilated cabinet. Field wiring is supported by terminals that include a +15 V sensor supply at 30 mA, a +10 V reference source at 6 mA, and an open-collector status output of 30 V/30 mA for PLC feedback. Brake control is handled through PA/PB lines to a GTR7 transistor stage, which allows rapid motor stopping without external contactors.
