13.F0.R11-3429 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 13.F0.R11-3429 is part of the F0 Combivert Control Cabinets series and has a maximum motor power of 3 kW with a rated output current of 7.5 Amps. It provides three programmable inputs, includes two relay outputs, and is rated for an IP20 protection class. The unit weighs 4 kg and accepts wire cross sections up to 2.5 mm².
Internal Product Review
The 13.F0.R11-3429 is a KEB F0 Combivert control cabinet with 3-phase output and 5.2 kVA rated output power. Rated output current of 7.5 A and max motor power of 3 kW support stable, efficient drive performance in demanding panel applications. A strong technical option for industrial use, especially with IP20 protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 13.F0.R11-3429 belongs to the F0 Combivert Control Cabinets series produced by KEB. It is a cabinet-mounted drive controller intended to regulate three-phase induction or synchronous motors in automated machines. The unit provides a pre-wired enclosure that consolidates power switching, control electronics, and field wiring into one product. Because the main drive functions are grouped inside one cabinet, the surrounding machine can use a more compact external wiring layout.
The power channel is protected by a 20 A mains fuse that disconnects the cabinet if an upstream fault drives current beyond its thermal limit. Downstream, the inverter can deliver a continuous 7.5 A to the motor over three output phases and supports a peak mechanical demand of 3 kW. Internally, the control board provides a stabilized +15 VDC supply for feedback devices and a separate +10 VDC reference for analog speed or torque commands from the host PLC. This arrangement supports common control loops without requiring a separate low-voltage reference source for those signals. Three programmable inputs allow mode selection or interlocks, while two relay outputs can report ready or fault status to external circuits. Motor sensors and I/O land on terminals sized for 2.5 mm² wire, which helps limit voltage drop at the stated load currents.
For thermal and accessibility reasons, the enclosure requires 50 mm of side clearance and 100 mm above and below when installed. It carries an IP20 rating, so it must be placed inside another protective cabinet if dust or liquids are present. The open space around the housing also leaves room for cable routing and natural heat dissipation during operation. Rated apparent power reaches 5.2 kVA, and that value applies up to a maximum mounting altitude of 3000 m. At higher elevations, reduced air density can affect cooling performance, so the stated mounting limit is important. Overall mass is 4 kg, which keeps handling straightforward during installation and places only a modest load on the mounting surface.
