10.F0.R01-0000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 10.F0.R01-0000 is part of the F0 Combivert Control Cabinets series and offers a rated output power of 4.0 kVA with a rated output current of 5.8 Amps. This model supports three input phases and provides a maximum motor power of 2.2 kW with a top output frequency of 408 Hz. The cabinet comes with an IP20 protection rating and has a maximum mounting altitude of 3000 meters.
Internal Product Review
The 10.F0.R01-0000 is a KEB F0 Combivert control cabinet designed for 3-phase drive applications up to 2.2 kW. IP20 protection and a 5.8 A rated output current support dependable service in enclosed industrial installations. Low 75 W heat dissipation makes this cabinet a well-balanced and efficient drive solution.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F0.R01-0000 control cabinet is manufactured by KEB and belongs to the F0 Combivert Control Cabinets series. Designed for use in industrial automation cells, this unit houses power electronics that convert fixed three-phase mains into a variable frequency output for induction or synchronous motors. By providing closed, panel-mounted speed control, it removes the need for mechanical gear changes and permits programmable acceleration, deceleration, and torque regulation within conveyors, pumps, or processing equipment.
The power stage accepts a three-phase supply protected by a max mains fuse of 10 A and an intermediate bus fuse rated at 16 A. Downstream of the conversion circuitry the cabinet delivers a continuous output of 5.8 A, equating to 4.0 kVA apparent power under nominal conditions. Its modulation range extends up to 408 Hz, supporting motors up to 2.2 kW without derating. A 0.4 A control fuse safeguards auxiliary electronics, while an internal rail supplies +15 V for logic and sensor circuits. All field wiring must use conductors of at least 1.5 mm² cross-section to carry the stated currents safely, and the cabinet is specified for three input phases to ensure balanced loading.
During operation the enclosure sheds 75 W of thermal energy and therefore requires unobstructed airflow; 50 mm side clearance and 100 mm at the top and bottom are mandatory. The housing carries an IP20 rating, so it must be installed inside a closed panel when airborne contaminants are present. Environmental limits allow full output up to 3000 m installation altitude and within ambient humidity not exceeding 95% non-condensing. These ratings make the cabinet suitable for most indoor production floors while defining the layout, ventilation, and protection measures the machine builder must observe.
