10.F0.R11-4A09 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
30 Seconds
The KEB 10.F0.R11-4A09 is part of the F0 Combivert Control Cabinets series and weighs 4 kilograms. It supports a maximum motor power of 2.2 kW and operates with a rated mains voltage of 400 V and a rated output power of 4.0 kVA. The unit features IP20 protection class, three programmable inputs, and has a maximum installation altitude of 3000 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F0.R11-4A09 cabinet-mounted inverter is produced by KEB within the F0 Combivert Control Cabinets series. Intended for integration into centralized panels, the unit converts fixed mains power into a regulated three-phase output that can be varied in frequency and amplitude for precise motor speed control in automated machinery and process lines. It serves as the drive core for small conveyors, pumps, and positioning axes, allowing coordinated acceleration, deceleration, and torque limiting under PLC supervision. Its cabinet-mounted format is suited to enclosed control panels where the drive can operate as part of a centralized motion system.
Electrically, the drive accepts a three-phase supply with a rated mains voltage of 400 V. The power stage is rated at 4.0 kVA and can deliver a continuous line current of 5.8 A to the motor terminals. Switching at 4 kHz produces 75 W of heat, so panel airflow must remove that thermal load during operation. The housing has a protection class of IP20, which means it is intended for installation behind a protective door or within an enclosure. Upstream protection uses a 10 A mains fuse, and the internal terminals accept 1.5 mm² conductors. Control electronics include a stabilized +15 V rail for encoders, a 10 V reference for analog setpoints, and three programmable digital inputs for sequence logic. The converter senses three input phases and feeds regulated power to the output without a transformer stage, which helps keep the unit compact.
Full performance is maintained up to 3000 m installation altitude and at ambient humidity as high as 95 % without condensation. The inverter can operate motors rated up to 2.2 kW while the unit itself has a mass of 4 kg, which supports use in compact cabinet layouts. Its modest weight helps reduce panel loading, and the format allows multiple units to be installed in the same enclosure when spacing and airflow are properly managed. Stable analog reference tracking supports consistent speed control in systems that rely on analog command signals.
Frequently Asked Questions about 10.F0.R11-4A09:
Q: What is the maximum installation altitude for the 10.F0.R11-4A09 control cabinet?
A: The KEB 10.F0.R11-4A09 control cabinet supports a maximum installation altitude of 3000 meters above sea level.
Q: How many programmable inputs are available on the 10.F0.R11-4A09?
A: The unit offers three programmable inputs for flexible signal integration.
Q: What is the rated output power for the KEB 10.F0.R11-4A09?
A: This model has a rated output power of 4.0 kVA for driving connected motors.
Q: What is the +15 V output current on the 10.F0.R11-4A09 control cabinet?
A: It provides a +15 V output current capability of 30 mA.
Q: What type of mains fuse should be used with the 10.F0.R11-4A09 control cabinet?
A: The 10.F0.R11-4A09 is rated for use with a 10 A mains fuse for proper circuit protection.
