10.F0.210-0000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
34 Seconds
The KEB 10.F0.210-0000 is part of the F0 Combivert Control Cabinets series and features a maximum motor power of 2.2 kW with a rated output current of 5.8 Amps. This cabinet provides a protection rating of IP20, is designed for use with three line phases, and has a maximum installation altitude of 3000 meters.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 10.F0.210-0000 is a cabinet-mounted drive controller produced by KEB within the F0 Combivert Control Cabinets series. Designed to regulate induction or synchronous motors in automated machinery, the unit integrates mains rectification, inverter stages, and logic in a single enclosure, simplifying panel layout in production lines. It serves as the central power module between a three-phase utility feed and field wiring, distributing controlled voltage and frequency to attached machines while accepting standard PLC commands.
It operates on a three-phase supply and delivers a continuous output of 4.0 kVA, corresponding to 5.8 A of rated current at the inverter terminals. The power section can energize motors up to 2.2 kW, so conveyors or indexing tables fall within its range. At a 4 kHz switching frequency, the semiconductor bridge releases 75 W of heat, which must be channeled away by cabinet airflow to avoid derating. Control electronics are supplied by an auxiliary rail that furnishes +15 V DC, and the logic draws only 30 mA, reducing load on external power supplies. Eight digital control channels accept PNP-type inputs for direct connection to sourcing sensors and PLC outputs, while the main rectifier is designed for three line phases.
The enclosure carries an IP20 protection rating, making it suitable for mounting inside closed panels where ingress from water jets is not expected. Installation is permitted up to 3000 m above sea level, with an automatic output reduction of 1% for every 100 m climbed to protect the semiconductors. A line fuse of 10 A must be fitted in the upstream circuit, and wiring must not be smaller than 1.5 mm². Safe airflow requires at least 50 mm of clearance at the sides and 100 mm above and below the cabinet. Ambient humidity may reach 95% non-condensing, allowing the controller to operate in humid industrial areas when it is installed inside a suitable enclosure.
Frequently Asked Questions about 10.F0.210-0000:
Q: What is the rated output current of the 10.F0.210-0000 control cabinet?
A: The KEB 10.F0.210-0000 has a rated output current of 5.8 A.
Q: What is the maximum motor power supported by the KEB 10.F0.210-0000?
A: This model supports a maximum motor power of 2.2 kW.
Q: What protection rating does the 10.F0.210-0000 offer?
A: The protection rating is IP20, indicating limited protection against solid objects and no protection against liquids.
Q: What is the heat dissipation of the 10.F0.210-0000 at 4 kHz?
A: Heat dissipation at 4 kHz is specified at 75 W for this unit.
Q: How many line phases does the 10.F0.210-0000 utilize and what is the mains fuse rating?
A: This cabinet operates on three line phases and uses a 10 A mains fuse.
