Product Description:

The 09.F0.C00-1229 control cabinet is manufactured by KEB as part of the F0 Combivert Control Cabinets series. Designed for small machine cells, the unit combines a drive module with protective devices in a ready-to-mount package. It converts a single-phase supply to a three-phase motor output and coordinates basic thermal and overcurrent trips for conveyor sections, packaging stations, and similar automation tasks.

Its incoming feeder is limited by a control fuse rated at 0.4 A, while the intermediate circuit is further protected with a 16 A semiconductor fuse; the main disconnect upstream may be sized up to 20 A. The cabinet accepts a single-phase 200 V class line and dissipates up to 70 W under full load, so enclosure ventilation must accommodate that thermal output. Internally, the inverter converts the single input phase into three output legs, providing a balanced three-phase waveform for the connected motor. An IP20 enclosure indicates finger-safe openings but no water protection, making the cabinet suitable for installation inside a larger electrical enclosure. Conductor terminations require a minimum cross-section of 2.5 mm² to carry the rated currents without excessive heating, and an electronic sensor trips the drive at 70 °C to help prevent insulation damage.

With a continuous output capability of 7.0 A, the inverter can deliver up to 2.8 kVA, which corresponds to a maximum motor rating of 1.5 kW when operated on the specified supply. Reliable service is maintained between -10 °C and a maximum ambient temperature of 45 °C, and altitude can reach 3000 m before derating becomes necessary. The system monitors heat-sink temperature and issues an overtemperature fault at 70 °C so the power stage remains within semiconductor limits. Three output phases allow standard squirrel-cage induction motors to start smoothly and maintain speed under varying mechanical loads.