07.F0.R01-4A08 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 07.F0.R01-4A08 is part of the F0 Combivert Control Cabinets series and has a rated output current of 4.5 Amps with an output power of 1.8 kVA. It supports a maximum output frequency of 408 Hz, operates at up to 45 degrees Celsius, and has an IP20 protection rating. The cabinet weighs 3 kg and is rated for a maximum relative humidity of 95% with a maximum mounting altitude of 3000 meters.
Internal Product Review
The 07.F0.R01-4A08 is a KEB F0 Combivert control cabinet built for precise drive control, with 4.5 A rated output current and 1.8 kVA rated output power. IP20 protection and a 45 °C maximum ambient rating support dependable operation in properly enclosed industrial installations. A strong option for compact drive systems, especially with output frequency capability up to 408 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F0.R01-4A08 cabinet is manufactured by KEB and belongs to the F0 Combivert Control Cabinets series. It is an enclosed converter assembly intended for mounting inside a machine frame where it manages the speed, torque, and direction of small three-phase induction motors used in conveying, indexing, or auxiliary drive positions. By combining drive electronics, protective components, and field wiring terminals in one enclosure, the product keeps the installation compact and organized. This arrangement supports distributed automation layouts in which motor control hardware is placed close to the driven equipment.
At the output stage, the controller supplies 4.5 A of continuous current, corresponding to 1.8 kVA of apparent power for connected machine actuators. Modulation frequency extends up to 408 Hz, so the motor can run above line frequency when higher shaft speed is needed. Internal losses amount to 65 W, which affects heat dissipation inside the enclosure and should be considered in panel layout. Protection against accidental contact is rated IP20, making the unit suitable for use inside a closed cabinet rather than in exposed locations. Separate protective paths include an intermediate-circuit fuse and a control-circuit fuse, while the DC reference input uses a resistor for signal buffering. The unit also has a low overall mass, which supports straightforward mounting on standard DIN rails.
For field wiring, the terminals accept conductors up to 2.5 mm², allowing direct connection of typical control cabinet wiring without special adapters. Motor ratings up to 0.75 kW are supported for small drive tasks such as conveyors, feeders, and auxiliary machine motion. Installation is permitted at elevations as high as 3000 m without derating, provided relative humidity remains below 95 % so moisture does not collect across live parts. These operating limits suit indoor industrial panels where basic enclosure protection is sufficient and full washdown sealing is not required. The wiring layout, electrical capacity, and enclosed format make the unit practical for compact machinery that needs localized variable-speed motor control.
