07.F0.210-0000 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 07.F0.210-0000 is part of the F0 Combivert Control Cabinets series and operates with a rated input voltage of 230 VAC and supports single-phase input. It offers a maximum output frequency of 408 Hz and a max motor power of 0.75 kW, with a rated output current of 4.5 A. This cabinet features an IP20 protection class and has a heat dissipation of 65 W at 4 kHz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 07.F0.210-0000 is an AC variable-frequency inverter built by KEB for the F0 Combivert Control Cabinets series. Housed for panel integration, the product converts a fixed mains supply into a regulated variable-frequency output so that small induction motors can be speed-controlled without mechanical gear changes. By installing directly inside low-voltage control centers, it automates conveyors, pumps, and light-duty actuators where cabinet protection, compact footprint, and straightforward wiring are priorities in industrial automation.
Electrical ratings indicate how the drive is wired and protected. The mains connection accepts 230 VAC on a single-phase supply and tolerates line frequencies of 50/60 Hz. For branch circuit protection, a 0.4 A control-circuit fuse safeguards internal logic, while a 10 A intermediate-circuit fuse sits between the rectifier and the DC link; the upstream mains fuse may be sized up to 20 A. With a recommended minimum conductor cross-section of 2.5 mm², the inverter supplies a continuous motor current of 4.5 A and has an apparent power rating of 1.8 kVA. Speed regulation is supported from zero up to 408 Hz, enabling operation on machines rated as high as 0.75 kW. A 130% overload window for five minutes permits moderate acceleration without triggering protective trips.
Thermal and mechanical limits complete the operating envelope. Cabinet dissipation reaches 65 W at a 4 kHz switching frequency, so enclosure airflow must remove this steady heat load. The assembly carries an IP20 protection class, meaning live parts are finger-safe, but the drive must be mounted inside a closed cabinet to avoid dust and moisture. For short-term torque boosts, the inverter can deliver 150% of its rated current for two minutes, or 200% for thirty seconds, allowing recovery from momentary jams or heavy starts. These overload capabilities, combined with the earlier five-minute margin, let the controller handle transient demands without oversizing upstream wiring or breakers.
