32.E4.T60-1001 KEB
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The KEB 32.E4.T60-1001 is part of the Combiline EMC Filters series and supports a 3-phase plus PE configuration with a rated current of 1000 Amps. This filter is EMC Class C2 with a maximum input voltage of 3 x 480 V AC and a rated frequency of 50 or 60 Hz. It measures 458 mm in height, 280 mm in width, 185 mm in depth, and weighs 33.5 kilograms.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 32.E4.T60-1001 is an electromagnetic compatibility (EMC) filter produced by KEB within the Combiline EMC Filters series. Installed between a three-phase inverter and the mains, the unit attenuates conducted noise so surrounding equipment meets industrial emission limits and immunity levels. By providing a low-impedance path for high-frequency currents, the filter protects sensitive control electronics and allows drive systems to comply with harmonized standards in plant-wide automation.
The filter is dimensioned for a continuous load of 1000 A, meaning it can carry that line current without exceeding its thermal limits. It accepts up to 3 x 480 V AC (+10%), allowing operation on common 400 V and 460 V networks with headroom for supply fluctuations. Internal iron-core chokes and capacitive stages dissipate a maximum of 90 W; this loss must be removed by cabinet airflow to prevent overheating. During normal operation, the displacement current to ground is limited to 20 mA, minimizing residual-current device nuisance trips while still ensuring effective filtering. The design supports line frequencies of 50/60 Hz ±2, so the same hardware can be applied in regions with either utility standard without retuning.
For integration, the steel enclosure is 280 mm wide, 185 mm deep, and 458 mm tall, and it weighs 33.5 kg. Ambient installation temperatures up to 45 °C are permitted when convection paths are unobstructed. A busbar M10 line terminal simplifies the connection of large conductors, while the protective earth is clamped with M12 screws to keep ground impedance low. Motor cables may extend to 30 m before additional output chokes are required, and the filter meets immunity and emission limits for the industrial C2 category, allowing placement in machinery that operates on shared factory power rails.
Frequently Asked Questions about 32.E4.T60-1001:
Q: What is the maximum input voltage for the 32.E4.T60-1001 EMC filter?
A: The 32.E4.T60-1001 EMC filter supports a maximum input voltage of 3 x 480 V AC with an additional tolerance of +10%.
Q: What is the rated current of the 32.E4.T60-1001 EMC filter?
A: The rated current for this model is 1000 A, making it suitable for high-current applications.
Q: What EMC class does the 32.E4.T60-1001 belong to?
A: This filter is classified as EMC Class C2, ensuring compliance with relevant electromagnetic compatibility standards for industrial environments.
Q: What is the maximum ambient temperature the 32.E4.T60-1001 can operate in?
A: A maximum ambient temperature of 45 °C is supported by this filter during operation.
Q: What phase configuration does the 32.E4.T60-1001 support?
A: The 32.E4.T60-1001 is designed for use with 3-phase systems plus protective earth (PE).
