00.C6.CC1-0800 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.C6.CC1-0800 is part of the C6 Combicontrol Bus Couplers series and features 8 analog inputs with a 16-bit resolution. It supports EtherCAT fieldbus communication at 100 Mbit/s and connects via a 36-pole spring-loaded terminal. The device is protected to IP20, mounts on a 35 mm DIN rail, and operates at temperatures from 0°C to 55°C.
Internal Product Review
The 00.C6.CC1-0800 is a KEB C6 Combicontrol bus coupler with 8 analog inputs and EtherCAT communication at 100 Mbit/s. A 16-bit resolution combined with a 3.88 Hz sampling frequency supports accurate, stable signal acquisition in temperature and resistance applications. IP20 protection and 35 mm DIN rail mounting make the unit a strong choice for clean industrial panel integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.C6.CC1-0800 bus coupler from KEB belongs to the C6 Combicontrol Bus Couplers series. Designed for measurement and data-acquisition tasks in distributed control systems, the module converts analog sensor signals into process data that an EtherCAT master can read. By bridging field I/O to a high-speed controller, it lets machine builders add scalable temperature and resistance monitoring without changing the primary PLC architecture. This arrangement supports applications that need direct integration of resistance-based sensing into an existing automation network.
This unit offers 8 analog inputs that accept two-wire or three-wire resistance sensors. The channel electronics resolve each measurement to 16-bit resolution, and the sampling rate of 3.88 Hz suits slowly changing temperature values. For communication, the coupler connects to the master through 100 Mbit/s EtherCAT, allowing deterministic updates across the backplane. Electrical demand on the local bus remains low at 170 mA drawn through the E-bus, which helps preserve current capacity for neighboring terminals. The spring-loaded 36-pole terminal simplifies field wiring, and the accepted sensor span covers Ni100 devices from −60 °C to +250 °C, Pt100 elements from −75 °C to +670 °C, and resistances between 70 Ω and 330 Ω. Input data pass to the control layer through the E-bus plug, which also supplies operating power to the module.
In mechanical terms, the module occupies a compact 25 × 120 × 90 mm footprint and clips directly onto a 35 mm DIN rail for panel mounting. The housing has an IP20 enclosure, so it is intended for installation in closed cabinets protected from conductive dust and liquid spray. It operates within a temperature range of 0 °C to +55 °C, while storage is permitted from −25 °C to +70 °C when the equipment is shut down. Its narrow body helps conserve rail space in control cabinets where multiple terminals must be mounted side by side. That format also keeps the analog channels close to neighboring control hardware without requiring a large amount of cabinet depth.
