00.C6.CC1-0200 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 00.C6.CC1-0200 is part of the C6 Combicontrol Bus Couplers series and provides 8 analog inputs with a 36-pole connection. It features a resolution of 12 bits, a conversion time of 290 microseconds, and supports a measuring range from 0 to 20 mA or 4 to 20 mA. The bus coupler operates on EtherCAT at 100 Mbit/s and offers a sensor supply of 24 V DC with a maximum current of 200 mA.
Internal Product Review
The 00.C6.CC1-0200 is a KEB C6 Combicontrol bus coupler with 8 analog inputs and EtherCAT 100 Mbit/s fieldbus connectivity. A 12-bit resolution and measuring error below ±0.5% final value support accurate, stable signal acquisition in demanding control applications. Fast 290 µs conversion makes the module a strong choice for responsive analog monitoring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 00.C6.CC1-0200 belongs to the C6 Combicontrol Bus Couplers series manufactured by KEB. Classified as an analog input module, it sits on an EtherCAT rail and digitizes multiple process currents so that a PLC can read them in real time. Integrating this device into a machine network eliminates separate transducers and places the conversion stage close to the sensors, which shortens analog cable runs and minimizes electrical noise in industrial automation layouts.
This module presents 8 analog inputs routed through a 36-pole connection. Each channel accepts 0…20 mA or 4…20 mA loops while presenting an internal resistance below 300 Ω, so most transmitters can drive the card without extra buffering. A conversion time of 290 µs sets the maximum delay from analog level to digital word, and the built-in input filter blocks frequencies above 100 kHz to suppress fast transients that would alias into the reading. The converter quantizes every sample with 12-bit resolution, producing a smallest detectable step of 5.2 µA. Under these conditions, the stated measuring error stays within ±0.5% of the final value, giving predictable accuracy for closed-loop control tasks.
Power and communication share the E-bus backplane, where the card draws 190 mA. Data are forwarded on an EtherCAT 100 Mbit/s fieldbus, so the channel throughput aligns with high-speed motion or temperature regulation schemes. Internally, the sample sequencer operates at 0.76 kHz, ensuring that every input is refreshed before new process events become significant. A dedicated sensor feed of 24 V DC, with up to 200 mA available, lets two-wire transmitters receive power directly from the terminal strip. Mechanical dimensions are fixed at 25 mm width, 90 mm depth, and 120 mm height, allowing this slice to mount beside other C6 modules without exceeding standard enclosure clearances.
