19.BR.226-6152 KEB
Wake Industrial LLC is not an authorized distributor of this product.
The KEB 19.BR.226-6152 is a braking resistor from the BR Braking Resistors series. It has a resistance of 15 Ohms and a continuous power rating of 2300 Watts with a 400 Volt voltage class. The stainless steel housing measures 625 mm in height, 270 mm in length, and 116 mm in depth.
Internal Product Review
The 19.BR.226-6152 is a KEB BR braking resistor with a stainless steel housing and a 400 V voltage class. A 15 Ohm resistance supports predictable energy dissipation, while 2300 W continuous power suits demanding drive deceleration duty. A strong option for industrial braking circuits, especially with 38000 W pulse power over 6 s.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 19.BR.226-6152 braking resistor is manufactured by KEB within the BR Braking Resistors series. Designed for integration with variable-frequency drives and servo amplifiers, the device presents a fixed ohmic load that absorbs regenerated energy whenever the connected motor operates in generator mode. By safely converting that electrical surplus into heat, it protects the DC link from overvoltage events and supports aggressive stop-and-start profiles in conveyor lines, hoists, and other automated industrial equipment. The tube-style enclosure allows straightforward cabinet or roof mounting in industrial enclosures.
It is rated for a continuous dissipation of 2300 W when ambient temperature and airflow remain within permitted limits. The resistor value of 15 ohms matches KEB drives in the 400 V DC link class, ensuring the braking chopper can develop sufficient current without overstressing switching devices. For short duty peaks, the assembly can handle 38,000 W for 6 s or 10,000 W for 25 s, figures that correspond to single emergency stops or sporadic high-inertia decelerations within a 120 s thermal cycle. These ratings allow the resistor to absorb large energy bursts without exceeding its permissible surface temperature.
The housing supports safe installation near power electronics. With an overall height of 625 mm, a depth of 116 mm, and a body length of 270 mm, the unit fits inside tall control cabinets while leaving space for cable ducts. Mounting slots span 526 mm center-to-center so the assembly fastens directly to standard back panels without extra brackets. During repeated slow-down events, it can dissipate 6000 W for 40 s. The enclosure is made of Stainless Steel (AISI 304), which provides corrosion resistance in plant areas where humidity or coolant mist is present. The steel tube housing also promotes uniform airflow around the resistive element and helps shield against direct contact with hot surfaces.
