FC102P5K5T4E55H1XGXXXXSXXXXAX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC102P5K5T4E55H1XGXXXXSXXXXAX is part of the VLT FC 102 HVAC Drives series and has a typical shaft output of 5.5 kW with an efficiency of 0.97. This drive features an input supply of 3 x 380-480 V AC, delivers 7.5 hp shaft output at 460 V, and has a protection rating of IP55. Its enclosure measures 200 mm in depth, 420 mm in height, and 242 mm in width.
Internal Product Review
The FC102P5K5T4E55H1XGXXXXSXXXXAX is a Danfoss VLT FC 102 HVAC drive built for 3 x 380-480 V AC input and 5.5 kW typical shaft output. From a controls standpoint, 0.97 efficiency and IP55 protection make the unit especially appealing for dependable HVAC service in demanding installations. A 100 kA short-circuit rating stands out as a strong technical advantage.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC102P5K5T4E55H1XGXXXXSXXXXAX is an AC variable frequency drive from Danfoss in the VLT FC 102 HVAC Drives series. Designed for fan and pump duties in building automation, the unit modulates induction motor speed to match real-time airflow or water-flow requirements. This variable-speed operation reduces energy consumption and mechanical stress within ventilation and chiller loops by limiting unnecessary motor output.
The drive accepts a three-phase input of 3 × 380–480 V AC and delivers a motor output current of 13 A when the supply is between 380 and 440 V. At 441–480 V, the current limit falls to 11 A because of the converter’s constant-power regulation profile. Electrical conversion efficiency reaches 0.97, and the drive produces 187 W of heat at rated load. The sealed heat sink and internal airflow manage this thermal output during normal operation. The housing has an IP55 protection rating, allowing installation in mechanical rooms that are dusty or exposed to water spray. EMC conformance covers Category 1/2 through an integrated A1/B filter, and the A5 enclosure has standard cable entries to simplify wiring. The drive does not include a brake chopper, local control panel, or mains disconnect. Its printed circuit boards are uncoated, making the unit suitable for controlled indoor environments where condensation and corrosive airborne contaminants are not expected.
The drive provides a typical shaft output of 5.5 kW, or 7.5 hp when operated on a 460 V network. Its short-circuit rating is 100 kA, allowing connection to electrical systems with high available fault current when suitable upstream protection is installed. The enclosure has a compact depth of 200 mm, which helps conserve space in equipment rooms and wall-mounted installations. The supplied mounting plate measures 420 mm in height and 242 mm in width, providing dimensions that suit common back-panel layouts. The integrated filtering can reduce the need for additional external EMC components in installations that meet the applicable wiring and grounding requirements.
