FC102P1K1T4E55H2XGX7SXSXXXXAXB Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC102P1K1T4E55H2XGX7SXSXXXXAXB is part of the VLT FC 102 HVAC Drives series and provides a rated power of 1.1 kW with 1.5 horsepower. It operates with a continuous input current of 2.7 A at 3 x 380-480 V AC and features an efficiency of 0.96. This drive has an IP55 / NEMA Type 12 protection rating and supports cable entry with standard imperial options.
Internal Product Review
The FC102P1K1T4E55H2XGX7SXSXXXXAXB is a Danfoss VLT FC 102 HVAC drive rated at 1.1 kW for 3 x 380-480 V AC systems. With 0.96 efficiency and IP55 / NEMA Type 12 protection, this drive stands out as a dependable option for HVAC applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC102P1K1T4E55H2XGX7SXSXXXXAXB is a variable frequency drive manufactured by Danfoss within the VLT FC 102 HVAC Drives series. It regulates induction motor speed in air-handling units, chillers, and pump sets, giving building automation systems precise control over airflow or fluid volume. The unit serves as the power converter between the three-phase supply and the motor terminals, allowing soft starts, reduced energy use, and fault monitoring in ventilation and refrigeration plants.
The power stage accepts 3 x 380–480 V AC and draws a continuous line current of 2.7 A, matching small fan motors typically found on branch ducts. At that input, the inverter delivers 1.1 kW of rated mechanical power while maintaining an efficiency of 0.96, so it generates limited heat inside control cabinets. The IP55 / NEMA Type 12 enclosure blocks dust and low-pressure water jets, and the housing has standard cable entries provided through Adaptation A. Because the internal design omits a brake IGBT, braking energy must be handled by the load or an external resistor. An imperial gland plate supports conduit hardware, and factory-installed fuses protect the mains input path. The printed circuit boards have a 3C2 protective coating that helps resist moisture and airborne contaminants.
On the motor side, the converter supplies up to 3 A when the supply is within 380–440 V and limits the output to 2.7 A on 441–480 V networks. This current reduction helps keep the device within its power dissipation limit of 58 W. Conducted emissions are suppressed by an integrated filter that meets class A2 (C3), supporting use in commercial buildings. A short-circuit current rating of 100 kA rms permits installation on feeders protected by high-capacity circuit breakers without additional upstream components. The drive is supplied without a local control panel, so parameters must be accessed through a remote interface. BACnet or Modbus communication can connect the drive to a compatible building automation system for control and monitoring.
