FC102P15KT4E66H3XGX1XXSXXXXAXBX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
17 Seconds
The Danfoss FC102P15KT4E66H3XGX1XXSXXXXAXBX is a VLT FC 102 HVAC Drive with a 15 kW power rating and an efficiency of 0.98. It features IP66 enclosure rating, a standard cable entry, and does not include a brake chopper or local control panel. This model measures 260 mm in depth, weighs up to 23 kg, and includes a Class A1/B RFI filter suitable for reduced cable length.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC102P15KT4E66H3XGX1XXSXXXXAXBX is an AC variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. The unit interfaces with building management controllers to regulate induction motor speed in air-handling units, cooling towers, and circulation pumps, allowing precise flow control rather than simple on-and-off operation. By matching motor speed to real-time demand, the drive reduces electrical consumption and mechanical wear in automated HVAC installations. Its variable-speed operation also supports gradual acceleration and deceleration, which can reduce stress on connected equipment and limit abrupt changes in airflow or fluid pressure.
It accepts a three-phase input supply and delivers a rated output of 15 kW. At rated load, the power section converts energy with an efficiency ratio of 0.98 and dissipates 392 W as heat through its aluminum base and heat sink fins. The housing has an ingress protection rating of IP66, allowing installation in washdown areas without an additional enclosure. Standard cable entries are provided under the Adaptation A code, and the unit does not include an integrated brake chopper because dynamic braking is generally unnecessary in HVAC applications. The drive fastens to a steel mounting plate measuring 480 mm high by 242 mm wide, providing fixed bolt locations for secure installation. The absence of a brake chopper also keeps the power arrangement focused on fan, pump, and air-handling applications that typically rely on controlled deceleration.
The drive weighs 23 kg and has a depth of 260 mm, allowing it to fit shallow wall-mounted cabinets where suitable ventilation is available. An internal radio-frequency interference network carries the Class A1/B designation for reduced cable length, supporting electromagnetic compatibility in commercial buildings. The drive uses the B1 frame size, which establishes its housing format and mounting arrangement. The printed circuit board is not coated, so the installation environment should be selected with the internal electronics in mind. The unit does not include a local control panel or a mains option module, and its cabling uses the standard entry arrangement. Operating commands and status information can instead be exchanged through the connected building management system when the required control interface is configured.
Frequently Asked Questions about FC102P15KT4E66H3XGX1XXSXXXXAXBX:
Q: What is the power rating of the FC102P15KT4E66H3XGX1XXSXXXXAXBX drive?
A: The Danfoss FC102P15KT4E66H3XGX1XXSXXXXAXBX has a power rating of 15 kW for HVAC applications.
Q: What efficiency can be expected from the FC102P15KT4E66H3XGX1XXSXXXXAXBX HVAC drive?
A: This model features a high efficiency rating of 0.98, helping minimize energy loss during operation.
Q: What level of environmental protection does the FC102P15KT4E66H3XGX1XXSXXXXAXBX provide?
A: The enclosure on this drive is rated IP66, providing strong protection against dust and water ingress.
Q: Is a brake chopper included in the FC102P15KT4E66H3XGX1XXSXXXXAXBX?
A: This drive does not include a brake chopper as part of its configuration.
Q: What type of power input is compatible with the FC102P15KT4E66H3XGX1XXSXXXXAXBX?
A: The FC102P15KT4E66H3XGX1XXSXXXXAXBX operates on a three-phase power input.
