FC-102P7K5T4E55H3 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-102P7K5T4E55H3 is a 10 horsepower HVAC drive from the VLT FC 102 HVAC Drives series by Danfoss. It operates with a rated power of 7.5 kW and supports three phase mains voltages from 380 to 480 VAC. This drive features an IP55 enclosure with RFI Class A1/B filtering and delivers an efficiency of 0.97.
Internal Product Review
FC-102P7K5T4E55H3 is a Danfoss VLT FC 102 HVAC drive engineered for 380 - 480 VAC mains and 10 hp duty. IP55 / Type 12 protection and 0.97 efficiency make the unit a strong choice for dependable HVAC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P7K5T4E55H3 is an AC variable frequency drive produced by Danfoss and supplied under the VLT FC 102 HVAC Drives series. Designed for building automation, the unit modulates the speed of three-phase induction motors that power fans, pumps, and compressors, allowing precise airflow and water circulation in heating, ventilation, and air-conditioning systems. By varying its output frequency, the drive reduces energy demand during partial-load conditions and improves comfort control while integrating with centralized controllers through standard I/O and network options.
The electrical section is rated for a maximum continuous input of 14.4 A when connected to 380–440 V mains, and it can deliver a continuous output of 16 A within the same voltage range. At 400 V, the apparent power capacity reaches 11 kVA, providing sufficient headroom for motors in the 10 hp class. The overall conversion efficiency is 0.97, meaning that only three percent of the incoming power is lost as heat during nominal operation. The input section accepts line voltages from 380–480 V AC, simplifying installation on international three-phase power systems.
The drive uses the compact A5 enclosure, and the housing carries a protection rating of IP55 / Type 12, guarding the internal electronics against nonconductive dust and low-pressure water jets commonly present in mechanical rooms. Thermal dissipation at 100% load is estimated at 255 W, a value that can be used to determine ventilation requirements for the installation area. The inverter supplies up to 7.5 kW of real power to the motor terminals while remaining within the operating limits of the series. For conducted emissions, an integrated filter meets RFI Class A1/B (C1) limits, supporting compliance with applicable residential and light-industrial electromagnetic compatibility requirements.
