FC-102P7K5T4E55H2XG
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Danfoss FC-102P7K5T4E55H2XG is part of the VLT HVAC Drive FC 102 series and utilizes ball bearings. It operates at a three-phase mains voltage range of 380-480 V, and draws 16 Amps of continuous current. The drive features an aluminum housing for durability and uses forced ventilation cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P7K5T4E55H2XG is an outstanding VLT frequency converter designed and manufactured by Danfoss. Specifically designed for three-phase motors, the FC-102P7K5T4E55H2XG operates at a wide mains voltage and ambient range. Based on its datasheet, this frequency converter operates at a mains voltage supply of 380 to 480 volts and delivers a typical shaft power of 7.5 kW or 10 hp. With a three-phase mains voltage supply of around 380 to 440 volts, the converter can safely achieve continuous and intermittent output currents of 16 A and 17.6 A, respectively. Beyond 440 volts, the converter can only operate at continuous and intermittent output currents of 14.5 A and 15.4 A, respectively.
Compared to other frequency converters, the FC-102P7K5T4E55H2XG is relatively heavier. With its A5 enclosure, the device has a protection rating of IP 55 and a mass of 13.5 kilograms. The converter itself has a height of 420 mm, a width of 242 mm, and a depth of 200 mm. At full-load conditions, the converter loses 255 watts of power and achieves an overall efficiency of 97%. To safely deliver the expected output current of the converter, it is advisable to use cables with a cross-section of at most 3 x 4 square millimeters for the motor, brake, and mains wiring.
To maintain full-scale operation of the FC-102P7K5T4E55H2XG, the ambient temperature must not go below 0 degrees Celsius or exceed 50 degrees Celsius. During operation, the relative humidity range for this converter is from 5 to 93%, non-condensing. Similar to other Danfoss’ FC-102 converters, the motor output has a frequency range of 0 to 590 hertz and a ramp time range of 1 to 3600 seconds.
Frequently Asked Questions about FC-102P7K5T4E55H2XG:
Q: What terminals in the FC-102P7K5T4E55H2XG correspond to the analog inputs?
A: Terminals 53 and 54 correspond to the analog inputs of the FC-102P7K5T4E55H2XG.
Q: What devices can be connected to the analog inputs of the FC-102P7K5T4E55H2XG?
A: Sensing devices such as temperature or pressure sensors are generally the most common types of analog inputs for frequency converters.
Q: What digital input terminals in the FC-102P7K5T4E55H2XG can be programmed as outputs?
A: Terminals 27 and 29 of the FC-102P7K5T4E55H2XG can optionally be programmed as digital outputs instead of inputs.
Q: What is the maximum shielded cable length for the FC-102P7K5T4E55H2XG?
A: For shielded cables, the FC-102P7K5T4E55H2XG can support a maximum length of 150 meters.
Q: What is the maximum starting torque that the FC-102P7K5T4E55H2XG can achieve for its motor output?
A: For its motor output, the FC-102P7K5T4E55H2XG can achieve a maximum starting torque of 135% of the nominal value for half a second.
