FC-102P7K5T4E55H Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-102P7K5T4E55H is a 10 HP HVAC drive manufactured by Danfoss as part of the VLT FC 102 HVAC Drives series. It supports three phase power with a rated power of 7.5 kW and operates on a mains voltage from 380 to 480 VAC. The drive features IP55 protection, has a mounting plate that measures 420 mm in height by 242 mm in width, and uses M25 entry sizes for control, mains, and motor connections.
Internal Product Review
The FC-102P7K5T4E55H is a Danfoss VLT HVAC drive rated for 10 HP on 380 - 480 VAC systems. Three-phase power support and IP55 / Type 12 protection make the unit especially appealing for HVAC installations that demand stable operation in enclosed industrial environments. A clean A5 enclosure gives the drive a service-friendly layout and makes the package a strong choice for dependable HVAC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P7K5T4E55H is a variable-frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. The unit modulates the speed of induction motors in ventilation, pumping, and chiller systems to match real-time demand and reduce energy consumption in building automation. Its variable-speed operation allows connected equipment to respond to changing airflow, pressure, and temperature requirements instead of running continuously at full speed. The drive connects to standard industrial mains and can be installed in electrical panels with appropriate clearances for wiring, ventilation, and access to its terminals.
The electrical interface is designed for three-phase power, and the drive accepts a mains voltage range of 380–480 VAC. At rated conditions, it supplies motors with 7.5 kW of power, which corresponds to 10 HP. The front mains terminals accommodate conductors through an M25 cable gland and require a tightening torque of 0.6 Nm for a secure electrical connection. Separate ground lugs require a tightening torque of 3.0 Nm, while the removable front cover requires 1.5 Nm. Correct fastening helps maintain reliable conductor contact and supports the seal around the front cover. The IP55 / Type 12 enclosure protects internal components from dust, water jets, and common contaminants found in mechanical rooms and similar indoor locations.
The drive uses an A5 frame size and has a body depth of 200 mm, allowing panel layouts to account for the space behind the enclosure and the routing of connected cables. Its mounting plate measures 420 mm in height and 242 mm in width. The mounting holes have a horizontal spacing of 215 mm and a vertical spacing of 402 mm, allowing the plate to align with suitable back panels. Separate M25 entries are provided for control wiring, the mains supply, and motor leads, which helps organize the cable routes and maintain consistent bend radii. Proper separation of control and power conductors can also reduce interference in low-voltage command and feedback signals. Adequate clearance around the cable entries and cover allows the wiring to be routed without placing excessive strain on the glands or terminal connections.
