FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
20 Seconds
The Danfoss FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and features a power rating of 5.5 kW with a 7.5 horsepower output. It operates on three phase power with a mains voltage of 380 to 480 VAC and includes IP55 protection as well as a graphical local control panel. The drive offers a mains disconnect and an RFI filter rated Class A1/B (C1).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss within the VLT HVAC Drives series. Classified in the VLT HVAC Drive product group, it is intended for speed regulation of centrifugal fans, pumps, and compressors in building automation. By varying motor frequency, the unit allows precise airflow or water-flow adjustment while lowering energy use across heating, ventilation, and air-conditioning equipment. Because fans and pumps usually follow square-law load behavior, even modest speed reductions can lower power demand during partial-load operation.
It supplies a continuous output of 5.5 kW, which is equivalent to 7.5 HP, for direct connection to mid-range air-handling motors. The input section accepts 380–480 VAC and is designed for three-phase power networks commonly used in commercial facilities. An enclosure rating of IP55 / Type 12 protects the internal electronics against dust and sprayed fluids, so the drive can be mounted in mechanical rooms without a sealed cabinet. The voltage range gives the unit flexibility where supply conditions vary across large facilities or between regional installations. Dynamic braking hardware is omitted because this configuration does not include a brake chopper, and the printed circuit boards are uncoated to support heat transfer and keep the internal layout straightforward.
Operator interaction is provided through the graphical local control panel interface, which gives direct access to status values and parameter menus at the drive. A front-mounted display also allows operating conditions and alarms to be reviewed directly on the unit during normal use. Electromagnetic compatibility is supported by the integrated RFI Class A1/B (C1) filter, helping limit conducted interference in connected building systems. Upstream isolation is simplified by a factory-fitted mains disconnect. The identifier 102 marks this version within the HVAC drive line, and the unit is configured without add-on option cards or adaptation hardware.
Frequently Asked Questions about FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX:
Q: What is the horsepower rating of the FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX HVAC drive?
A: The FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX HVAC drive provides 7.5 HP for efficient motor control in ventilation and air conditioning systems.
Q: What mains voltage and phase does the FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX support?
A: This Danfoss HVAC drive is designed for use with a 380-480 VAC three-phase power supply for reliable industrial performance.
Q: What is the protection rating of the FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX drive?
A: The FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX features a protection level of IP55 / Type 12 for resistance against dust and water ingress.
Q: What type of control panel does the FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX include?
A: This drive is equipped with a graphical local control panel, making parameter adjustment and monitoring straightforward.
Q: What type of RFI filter is integrated in the FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX?
A: The FC-102P5K5T4E55H1XGX10XSXXXXAXBXCXXXXDX includes an integrated RFI Class A1/B (C1) filter to limit electromagnetic interference.
