FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
9 Seconds
The Danfoss FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and supports a mains voltage of 380 to 480 VAC for three phase power. This model features an IP55 / Type 12 backplate for protection and includes a graphical local control panel. The drive also includes an RFI Class A1/B filter and standard cable entries.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive manufactured by Danfoss within the VLT FC 102 HVAC Drives series. It converts fixed-frequency mains power into a modulated output that matches the operating demands of fans, pumps, and compressors. This speed regulation allows building automation systems to control airflow, temperature, and pressure more precisely than mechanical throttling methods. Adjusting motor speed to actual demand can also reduce energy consumption and limit wear on dampers, valves, belts, and other connected components.
The enclosure has an IP55 / Type 12 backplate rating, protecting the internal electronics from dust and low-pressure water jets when the drive is installed correctly. Its input terminals accept a 380–480 VAC supply, making the drive suitable for common commercial and industrial power networks. The power section uses three-phase power to operate compatible HVAC motors with balanced phase loading. A front-mounted graphical local control panel provides access to parameters, operating data, and local start-and-stop controls without requiring a separate interface. Conducted emissions are limited by an integrated RFI Class A1/B (C1) filter, which supports operation on electrical networks that require electromagnetic interference control. The local display also presents drive status and fault information in a readable format for routine operation and troubleshooting.
The unit uses a Frame A5, B, and C backplate for an open drive back, allowing the heat sink to mount against a suitable cabinet surface for effective thermal transfer. The drive has no brake chopper, so it cannot control an external braking resistor through an integrated braking circuit. Deceleration settings must therefore remain within the drive and motor system’s available stopping capability to prevent excessive DC-bus voltage. The control board has an uncoated PCB, making installation in a clean, dry, and noncorrosive location important for dependable operation. Its interface includes the Standard Language Pack, providing the standard multilingual menu options available for this configuration. Cable routing, ventilation clearance, and mounting orientation should follow the applicable installation requirements so heat can leave the enclosure without obstruction.
Frequently Asked Questions about FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX:
Q: What mains voltage does the FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX HVAC drive support?
A: This drive operates with a mains voltage range of 380 to 480 VAC, making it suitable for standard industrial power supplies.
Q: Does the FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX support single-phase or three-phase power?
A: The FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX is designed for three-phase power systems.
Q: What is the protection level of the FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX drive?
A: It features IP55 / Type12 protection, providing resistance to dust and water spray for reliable operation in industrial environments.
Q: What type of control panel comes with the FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX?
A: This model is equipped with a Graphical Local Control Panel (LCP) for user-friendly interface and control.
Q: What type of RFI filter is integrated in the FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX?
A: The FC-102P4K0T4P55H1XGXXXXSXXXXAXBXCXXXXDX includes an RFI filter rated as Class A1/B (C1) for electromagnetic compatibility.
