FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
53 Seconds
The Danfoss FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and operates on a three phase power supply with a mains voltage rating of 380 to 480 VAC. This drive features IP20 chassis protection, RFI Class A1/B filtering, and is designed for normal cabinet mounting. It also comes with a graphical local control panel for user interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX is an HVAC-focused AC drive manufactured by Danfoss as part of the VLT FC 102 HVAC Drives series. This controller regulates the speed of induction motors used in air-handling units, pumps, and cooling towers within industrial automation and building management systems. By converting fixed-frequency mains power into a variable-frequency output, it maintains the required airflow or water flow while reducing energy consumption and mechanical wear. Its control functions support applications in which motor output must respond to changing heating, ventilation, and cooling demand.
The drive is designed for three-phase power and accepts a mains voltage range of 380–480 VAC, allowing direct connection to common industrial power systems. Its IP20 chassis enclosure is intended for installation inside a protected electrical cabinet. The integrated electromagnetic compatibility network is rated as RFI Class A1/B (C1) to reduce conducted interference on the incoming supply. A built-in graphical local control panel provides access to operating data, parameter menus, and drive controls through the standard language pack. The unit does not require an additional mains option, and its RFI filter is installed as part of the base configuration. The A, B, C0, C1, and D option positions do not contain additional plug-in modules, leaving the drive configured for its primary HVAC control functions.
Motor conductors enter through standard cable entries, providing conventional routing from the cabinet wiring ducts to the drive terminals. The unit uses uncoated printed circuit boards, so it is intended for dry, controlled cabinet environments without excessive moisture or airborne contaminants. Its normal cabinet mounting for A, B, and C frames allows the heat sink and chassis to align with the applicable backplate arrangement. The drive has no brake chopper, so it cannot directly control a braking resistor during regenerative operation. Kinetic energy produced during deceleration must instead be absorbed by the connected load or managed through suitable external braking equipment. Safe-stop connections use the functions available in the base drive rather than an added safety module. Adaptation B is not installed, preserving the standard mechanical and electrical arrangement for this model.
Frequently Asked Questions about FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX:
Q: What is the supported mains voltage range for the FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX?
A: The FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX supports a mains voltage range from 380 to 480 VAC for versatile international applications.
Q: What power phase does the FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX support?
A: This drive operates using three-phase power, suitable for standard HVAC installations.
Q: What protection rating does the FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX provide?
A: The protection level of this drive is IP20, and it features a chassis design for cabinet mounting.
Q: What type of local control panel is included on the FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX?
A: This model comes equipped with a Graphical Local Control Panel (LCP) for on-site configuration and monitoring.
Q: What RFI filter classification is included in the FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX?
A: The FC-102P4K0T4E20H1XGXXXXSXXXXAXBXCXXXXDX incorporates an RFI filter classified as Class A1/B (C1) for electromagnetic interference control.
