FC-102P4K0T4E20H1XG
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The FC-102P4K0T4E20H1XG HVAC drive from Danfoss is equipped with a nominal motor power of 4 kW. This efficient drive is part of the VLT HVAC Drive FC 102 series and boasts an IP20 protection rating. It features a graphic panel, weighs 4.9 kg, and measures 268 x 90 x 205 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P4K0T4E20H1XG is a highly praised Danfoss frequency converter released under the prestigious VLT automation series. Featuring a powerful E20 chassis, this device prevents accidental grounding through finger contact. Similar to other FC-102 converters, the FC-102P4K0T4E20H1XG employs an H1 RFI filter that blocks out unwanted EMI signals from neighboring devices, circuits, and electromagnetic sources. It operates at an ambient temperature of 0 to 45 degrees Celsius, but it may safely be transported or stored in an ambient range between -25 and 65 degrees Celsius. At subfreezing temperatures (-10 degrees Celsius), the converter experiences a reduction in its performance. This device does not experience derating when installed up to a maximum altitude of 1000 m above sea level.
The FC-102P4K0T4E20H1XG has a typical shaft power of 4.0 kW or 5 hp at 460 V. Below 441 volts, this frequency converter exhibits the following continuous and intermittent output currents: 10 A and 11 A. Above 440 volts, on the other hand, the corresponding continuous and intermittent output currents are 8.2 A and 9 A, respectively. At higher mains voltage, the current decreases to maintain constant power output. At the rated full load, the converter has an estimated power loss of 124 watts and an efficiency of 0.97. Similar to other FC-102 converters by Danfoss, this unit has a true power factor of more than 0.9.
When used as a variable frequency drive for a three-phase motor, the FC-102P4K0T4E20H1XG achieves a motor output frequency of 0 to 590 hertz. At this frequency range, the motor output voltage can achieve a value between 0 and 100% of the supply voltage. The FC-102P4K0T4E20H1XG incorporates a graphical local control panel (GLCP), which offers a powerful interface for quickly accessing and tweaking motor parameters.
Frequently Asked Questions about FC-102P4K0T4E20H1XG:
Q: How many digital inputs does the FC-102P4K0T4E20H1XG have?
A: The FC-102P4K0T4E20H1XG includes a total of six digital inputs, two of which are programmable as outputs.
Q: What is the minimum pulse width for the FC-102P4K0T4E20H1XG’s digital inputs?
A: For the FC-102P4K0T4E20H1XG’s digital inputs, the minimum pulse width is 4.5 ms.
Q: What is the voltage range for the FC-102P4K0T4E20H1XG’s digital inputs?
A: The FC-102P4K0T4E20H1XG’s digital inputs have a voltage range of 0-24 V.
Q: What is the input capacitance of the FC-102P4K0T4E20H1XG’s safe torque off terminal?
A: The FC-102P4K0T4E20H1XG’s safe torque off terminal has an input capacitance of 400 nF.
Q: What is the input resistance of the FC-102P4K0T4E20H1XG’s analog input terminal/s?
A: Each analog terminal of the FC-102P4K0T4E20H1XG has an approximate input resistance of 10 kilo ohms.
