FC-102P3K0T4E55H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P3K0T4E55H1XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and operates on three phase power with a voltage range of 380 to 480 VAC. It includes a graphical local control panel and provides protection at IP55 / Type 12 with an RFI filter rated at Class A1/B (C1).
Internal Product Review
The FC-102P3K0T4E55H1XGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT HVAC drive for 380 - 480 VAC service. The graphical local control panel supports efficient commissioning, and IP55 / Type 12 protection suits demanding HVAC installations. RFI Class A1/B (C1) filtering adds strong electrical compatibility, making this unit a very capable HVAC drive.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P3K0T4E55H1XGXXXXSXXXXAXBXCXXXXDX is an adjustable-speed drive built by Danfoss and supplied within the VLT FC 102 HVAC Drives series. As an HVAC drive, it regulates centrifugal fans, pumps, and compressors so building automation systems can match motor speed to real-time demand and reduce energy use. In plant environments, it serves as the link between incoming mains supply and induction motors by translating fixed-frequency power into programmable output. This allows airflow and fluid movement to be adjusted more precisely than with direct-on-line motor operation.
Incoming utility power must stay within 380 - 480 VAC and be provided on a three-phase power network, after which the converter generates variable voltage and frequency for the motor. For electrical noise control, an integrated RFI Class A1/B (C1) filter limits conducted emissions to nearby control circuits. The enclosure carries an IP55 / Type 12 rating, which allows wall mounting in areas where dust or splashing water may be present. A front-mounted graphical local control panel provides parameter access, status readouts, and local start/stop control. This lets routine adjustments be made at the drive without an external keypad. Optional A, B, mains, C0, C1, D, and software slots are not populated.
Mechanical installation uses standard cable entries, and no adaptation is applied in the B position so the enclosure keeps the base dimensions. Cable routing therefore follows the standard housing layout without added entry hardware. The control section uses an uncoated PCB, which is suited to clean indoor locations where airborne contamination is limited. The design includes no brake chopper, so regenerative energy is not dissipated through an internal braking circuit. Software is provided as the latest standard software release with the standard language pack for normal menu display and operation.
