FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX is a VLT FC 102 HVAC Drive series product with a power rating of 30 kW and a horsepower of 40 HP. It features a three-phase input, operates between 380 and 480 VAC, and provides IP55 Type 12 protection. The drive comes equipped with a graphical local control panel and an RFI filter of Class A1/B (C1).
Internal Product Review
The FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT FC 102 HVAC drive built for dependable motor control on 380 - 480 VAC three-phase power. A graphical local control panel supports efficient commissioning, and IP55 / Type 12 protection adds solid suitability for HVAC service conditions. The 30 kW and 40 HP rating makes the unit a strong choice for commercial airflow and pumping applications.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P30KT4E55H1XGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. It regulates motor speed in building automation systems so fans, pumps, and chillers can respond to real-time demand instead of operating continuously at a fixed frequency. Adjusting motor output to the required load can reduce unnecessary energy consumption and mechanical stress in HVAC equipment. The drive supports precise speed control in ventilation, water circulation, and cooling applications managed by a building control system.
Rated for 30 kW of continuous output, the inverter can supply up to 40 HP at the motor shaft. It accepts line power from 380–480 VAC and uses three-phase power, allowing direct connection to compatible industrial mains. The enclosure has an IP55 / Type 12 rating, protecting the internal electronics from dust and low-pressure water jets commonly encountered in mechanical rooms. The drive has no brake chopper, so applications requiring rapid deceleration must use an appropriate external braking or energy-management arrangement. Its printed circuit boards are not coated and should be installed away from chemically aggressive atmospheres or other sources of corrosive contamination. Standard cable entries support conventional gland-plate layouts and straightforward routing for line, motor, and control wiring. The baseline configuration does not include additional control or communication option cards.
An integrated RFI Class A1/B (C1) filter helps limit conducted electromagnetic interference at the input stage. Local setup and operation are handled through the Graphical Local Control Panel, which presents operating values, parameters, alarms, and status information in a readable format. Multilingual menus are provided through the Standard Language Pack, allowing users to navigate the drive without relying exclusively on external configuration software. The panel also provides direct access to motor settings and HVAC control functions from the enclosure. Its protected housing and integrated operator interface allow the drive to be mounted close to supported mechanical equipment when the installation conditions meet the enclosure requirements.
