FC-102P30KT4E20H1XN Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P30KT4E20H1XN is part of the VLT FC 102 HVAC Drives series and delivers a power rating of 30 kW or 40 horsepower. It operates on three phase power at 380 to 480 VAC and features an IP20 protection level. The drive includes an RFI Class A1/B filter and comes with a numerical local control panel for operation.
Internal Product Review
The FC-102P30KT4E20H1XN is a Danfoss VLT HVAC drive rated at 30 kW for 380 - 480 VAC systems. A numerical local control panel and RFI Class A1/B (C1) filtering make this unit especially appealing for clean integration and confident HVAC control.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P30KT4E20H1XN is a variable-frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series. This series 102 inverter is intended for building-services automation where precise motor speed regulation is needed for fans, pumps, and compressors. Installed inside a standard control cabinet, it converts fixed-frequency mains power into a regulated output so that air-handling and hydronic circuits can track real-time load requirements while minimizing energy consumption. The adjustable output also allows connected equipment to operate at the speed required by the current demand rather than continuously running at full speed.
The drive delivers a continuous mechanical output of 30 kW, which corresponds to 40 HP when motors are rated in imperial units. Its input section is wired for three-phase power and accepts a supply range of 380–480 V AC, allowing direct connection to common industrial distribution networks without a step-down transformer. The chassis has an IP20 protection rating, so the surrounding enclosure must provide any additional sealing required by the installation. Within these limits, the inverter’s vector-control algorithms manage voltage and frequency to maintain torque at low speeds and limit inrush current during motor startup. This control method supports gradual acceleration and stable operation as the mechanical load changes.
For applications that do not require regenerative braking, the design includes no brake chopper, reducing component count and panel heat. An integrated filter rated RFI Class A1/B (C1) helps the installation meet electromagnetic compatibility limits on the mains side. Local parameter access is provided through the numerical local control panel, which includes a keypad and eliminates the need for a separate programming device. The unit supports normal cabinet mounting for A, B, and C frames, aligning the heat sink and terminals with the applicable frame arrangement. This mounting configuration allows the drive to be positioned alongside contactors, breakers, and network modules while maintaining an orderly panel layout and accessible wiring paths.
