FC-102P2K2T4E21H2XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 131F0672
The Danfoss FC-102P2K2T4E21H2XGXXXXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and operates on three phase power with a mains voltage range of 380 to 480 VAC. It is designed for dry room mounting and features a graphical local control panel along with an integrated RFI filter. The drive provides an IP21 Type 1 protection level and uses standard cable entries.
Internal Product Review
The FC-102P2K2T4E21H2XGXXXXSXXXXAXBXCXXXXDX is a Danfoss VLT HVAC drive built for three-phase power on 380 - 480 VAC systems. The graphical local control panel and integrated RFI filter make setup cleaner and control access more efficient in panel applications. IP21 / Type 1 protection suits dry room mounting and rounds out a well-configured HVAC drive platform.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P2K2T4E21H2XGXXXXSXXXXAXBXCXXXXDX is an AC variable frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It provides speed-controlled operation for centrifugal fans, pumps, and compressors used in building automation systems. By adjusting the electrical output supplied to the connected motor, the drive allows equipment speed to follow changes in airflow, pressure, or circulation demand. Its control platform uses a consistent parameter structure across supported cabinet sizes, making operating menus familiar throughout the product line.
The drive accepts a mains voltage range of 380–480 VAC, covering common 400 V and 460 V industrial networks without requiring an autotransformer. It operates with three-phase power, which supports balanced loading during continuous motor operation. The enclosure has an IP21 / Type 1 rating, providing protection against finger contact and vertically falling water droplets in dry electrical rooms. An integrated RFI filter limits conducted electromagnetic emissions that could otherwise affect nearby equipment or the incoming supply. Setup, local operation, and status monitoring are available through the front-mounted graphical local control panel. Its plain-text menus and trend displays allow operating values, alarms, and drive conditions to be viewed directly at the unit.
The enclosure uses standard cable entries for routing mains, motor, and control wiring into the drive. Its installation format accommodates B, C, D, or E frame arrangements intended for dry indoor locations. The drive has no brake chopper, which is suitable for variable-torque fan and pump loads that normally produce little regenerative energy during deceleration. The control board has an uncoated printed circuit board and should therefore be installed where the surrounding air remains clean and dry. A standard language pack provides multilingual menu support for the local control panel. The baseline configuration does not add optional fieldbus, I/O, or mains accessory modules, leaving the available expansion positions open for application-specific equipment.
