FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
36 Seconds
The Danfoss FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series and has a power rating of 22 kW or 30 HP. This three phase drive operates at a mains voltage of 380 to 480 VAC and has an IP55 or Type 12 protection level. It comes equipped with a graphical local control panel and features an integrated mains disconnect along with an RFI Class A1/B filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX variable frequency drive is produced by Danfoss and belongs to the VLT FC 102 HVAC Drives series. Intended for building-service automation, the unit adjusts induction motor speed on fans, pumps, and compressors so that flow and pressure track real-time load demands. Variable-speed operation can reduce electrical consumption by allowing connected equipment to run at the speed required by the system instead of remaining at full output. Its proportional-integral control functions support the regulation methods commonly used in air-handling and chilled-water systems.
The drive provides a mechanical shaft output of 30 HP, which corresponds to an inverter power rating of 22 kW. It accepts utility power from 380 – 480 VAC, allowing operation on common 400 V and 460 V networks without a step-up transformer. The three-phase power input distributes the electrical load across all three supply phases. An integral DC choke helps control harmonic distortion and supports stable operation on the incoming power network. The IP55 / Type 12 enclosure protects internal components from airborne dust and dripping condensate in mechanical rooms. A graphical local control panel provides direct access to parameters, operating status, and manual start or stop commands without requiring external control equipment.
The mains section includes a built-in mains disconnect, allowing incoming power to be isolated at the drive cabinet. Power and control conductors pass through standard cable entries, which provide conventional routing into the enclosure. The drive has no brake chopper because typical fan and pump applications do not require regenerative braking. Conducted emissions are limited by the integrated RFI Class A1/B (C1) filter, reducing electrical noise without requiring an additional line filter. The circuit boards are supplied without conformal coating, so the enclosure provides the primary barrier against surrounding contaminants. A standard language pack provides multilingual menu access through the local control panel, and the series identifier is 102. The installed configuration does not include additional application software.
Frequently Asked Questions about FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX:
Q: What mains voltage does the Danfoss FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX support?
A: The FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX is designed to operate at 380 - 480 VAC for compatibility with standard industrial mains supplies.
Q: What is the horsepower rating of the FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX?
A: This HVAC drive is rated at 30 horsepower, making it suitable for midrange power applications.
Q: What level of environmental protection does the FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX provide?
A: The protection level for this model is IP55 / Type 12, offering good resistance against dust and water ingress in industrial environments.
Q: What type of control panel is included with the FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX?
A: It comes equipped with a Graphical Local Control Panel for user-friendly setup and monitoring.
Q: What type of power phase does the Danfoss FC-102P22KT4E55H3XGX1XX8XXXXAXBXCXXXXDX require?
A: The drive is built for three-phase power systems, ensuring efficient operation in commercial and industrial settings.
