FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
39 Seconds
The Danfoss FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX belongs to the VLT FC 102 HVAC Drives series and features a power rating of 22 kW with a 30 HP capacity. It supports three phase 380 - 480 VAC power and has an IP55 / Type 12 protection level. The drive comes equipped with a graphical local control panel and includes an RFI filter rated as Class A1/B (C1).
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX is produced by Danfoss for the VLT FC 102 HVAC Drives series. The variable-frequency drive regulates the speed of induction motors used in air-handling units, pumps, and fans. Its control functions support common HVAC operating requirements, including sleep mode and flow compensation. These capabilities allow the drive to adjust motor output in response to changing airflow, pressure, or water-flow demands. The unit can be installed in commercial and industrial HVAC systems that require controlled acceleration, stable speed regulation, and reduced energy consumption during periods of partial demand.
The drive provides a motor output of 30 HP, which corresponds to 22 kW of continuous shaft power. Its input bridge accepts a supply range of 380–480 VAC and operates with three-phase power, allowing connection to standard industrial electrical systems. An internal radio-frequency interference filter meets Class A1/B (C1) requirements and limits conducted electrical emissions. The IP55 / Type 12 enclosure prevents dust from interfering with operation and protects internal components against low-pressure water jets. This enclosure allows the unit to be mounted on a wall or skid in a mechanical room without requiring an additional protective cabinet. Adequate installation clearance should be maintained around the housing so cooling air can remove heat produced during continuous operation.
Operator access is provided through a graphical local control panel that supports menu navigation, parameter entry, operating-status review, and trend displays. A standard language pack provides multilingual menus for configuring motor and HVAC control functions. The drive has no brake chopper, so applications that produce regenerative energy must use an appropriate external braking or energy-management arrangement. Its option slots are empty, leaving the baseline configuration available for compatible communication or auxiliary modules when an application requires them. The unit uses uncoated circuit boards, while the sealed housing helps protect the electronics from dust and moisture encountered in mechanical rooms. No mains accessory is installed, and no application-specific adaptation has been applied to the standard configuration.
Frequently Asked Questions about FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX:
Q: What is the power rating and horsepower of the Danfoss FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX drive?
A: The FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX operates with a power rating of 22 kW, delivering up to 30 HP in output capability.
Q: What mains voltage and power phase are required for the FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX?
A: This drive is suitable for three-phase electrical supplies with a voltage range from 380 to 480 VAC.
Q: What protection level does the FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX offer?
A: Protection level for this model is rated at IP55 / Type 12, providing dust-tight sealing and protection against water jets.
Q: What type of local control panel is included with the FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX?
A: The drive comes equipped with a graphical local control panel (LCP) for easy on-site configuration and monitoring.
Q: Which RFI filter class is installed on the Danfoss FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX?
A: The FC-102P22KT4E55H1XGXXOXSXXXXAXBXCXXXXDX is fitted with an RFI filter rated for Class A1/B (C1), supporting electromagnetic compatibility.
