FC-102P22KT4E20H2XG Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P22KT4E20H2XG is part of the VLT FC 102 HVAC Drives series and is rated for 30 HP and 22 kW. It operates on three phase power with a mains voltage of 380 to 480 VAC and features a graphical local control panel. The drive is designed for normal cabinet mounting in A, B, or C frames and comes with IP20 chassis protection as well as an integrated RFI filter.
Internal Product Review
The FC-102P22KT4E20H2XG is a Danfoss VLT HVAC drive rated at 22 kW for 380-480 VAC service. Three-phase power support and a graphical local control panel make commissioning and operating adjustments especially straightforward in building automation applications. IP20/chassis protection with an RFI filter supports clean cabinet integration and dependable HVAC drive performance.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P22KT4E20H2XG is an AC variable frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. In building automation systems, the unit modulates the speed of induction motors that power air handlers, pumps, and cooling towers. This variable-speed operation allows temperature, pressure, and airflow to be matched to real-time demand while reducing unnecessary motor energy consumption. The drive can receive commands from an HVAC control system and adjust its motor output as operating conditions change throughout the day.
The inverter delivers a continuous power output of 22 kW, which indicates the electrical size of the connected fan or pump motor. It accepts a mains supply of 380–480 VAC and uses three-phase power, allowing direct connection to common industrial distribution systems within the permitted voltage range. The corresponding mechanical output rating is 30 HP, which supports comparison with motor nameplate values expressed in horsepower. Heat is removed through chassis ventilation, so the installation must provide adequate clearance for cooling airflow around the drive. The housing has an IP20 chassis rating, providing protection against accidental finger contact with live components but not against water. The drive must therefore be installed inside a suitable protective cabinet when moisture or other contaminants may be present.
An internal RFI filter suppresses conducted electrical emissions on the incoming supply lines and helps limit interference with nearby equipment. A graphical local control panel provides access to operating parameters, trend information, status displays, and local start-stop commands without requiring separate control hardware. The drive has no brake chopper, so applications requiring rapid deceleration must use another suitable method to manage regenerated energy. The unit supports normal cabinet mounting for A, B, and C frames, allowing it to fit the corresponding enclosure arrangements used for this drive range. Its VLT HVAC Drive controls are intended for fan and pump loads that benefit from gradual acceleration, regulated speed, and reduced mechanical stress. The internal series identifier is 102, placing the unit within the FC-102 model range.
