FC-102P22KT4E20H1XGXXXXSXXXX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The FC-102P22KT4E20H1XGXXXXSXXXX is a 30 HP drive from Danfoss, part of the VLT FC 102 HVAC Drives series. This three-phase unit features a 22 kW power rating, a continuous current of 44 A, and supports a mains voltage range of 380 to 480 VAC. It offers IP20 chassis protection and comes with a graphical local control panel and an RFI Class A1/B filter.
Internal Product Review
The FC-102P22KT4E20H1XGXXXXSXXXX is a Danfoss VLT FC 102 HVAC drive rated at 22 kW with a 380 to 480 VAC input range. Three-phase power and 44 A continuous current support stable motor control in demanding HVAC applications. The graphical local control panel and IP20/chassis construction make the drive a strong choice for cabinet-mounted building automation systems.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P22KT4E20H1XGXXXXSXXXX variable frequency drive is built by Danfoss for the VLT FC 102 HVAC Drives series. It converts fixed three-phase mains power into a controlled output that regulates induction motor speed in air-handling units, pumps, and chillers. This control allows building automation systems to adjust airflow or water flow according to real-time demand while reducing electrical consumption. The unit is intended for installation inside a control cabinet alongside other HVAC equipment.
The drive delivers a nominal output of 22 kW, which is the mechanical power it can continuously supply to a motor. It draws 44 A from a 380–480 VAC three-phase network. Conversion losses total 525 W, so the control cabinet must provide sufficient ventilation to remove the generated heat. The enclosure has an IP20 chassis rating and requires protection from direct exposure to water, dust, and accidental contact. Short-term overloads are supported by an intermittent current of 48.4 A, while the B4 frame size corresponds to the physical envelope used for B-series control frames. Standard cable entries use Adaptation A, while Adaptation B is unused. The drive does not include a brake chopper, coated circuit boards, or a mains disconnect. An RFI Class A1/B filter supports electromagnetic compatibility, and the graphical control panel provides local access for parameter entry. The standard language pack and installed software release support configuration through the control panel.
The inverter has an output rating of 30 HP for compatibility with common building-service motors. Its apparent power capability reaches 30.5 kVA, which supports the selection of upstream circuit protection and supply equipment. The enclosure measures 242 mm deep, 516 mm high, and 229 mm wide. These dimensions support the cabinet mounting method used for A, B, and C frames. The drive belongs to the VLT HVAC Drive product group and carries series code 102, using the parameter structure associated with FC-102 installations. Adequate clearance around the frame allows air to move across the heat sink and helps the drive maintain continuous output without thermal derating during ventilation service.
