FC-102P1K5T6E Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
The Danfoss FC-102P1K5T6E is part of the VLT FC 102 HVAC Drives series and supports three-phase power with a horsepower rating of 2.0 Hp and motor power of 1.5 kW. It features two analog inputs, one analog output, six digital inputs, two relay outputs with Form C relays, and two pulse inputs. The drive provides a continuous output current of 2.7 A and an overload rating of 110% for up to 60 seconds.
Internal Product Review
The FC-102P1K5T6E is a Danfoss VLT FC 102 HVAC drive with 2.0 Hp capacity and three-phase power input. A continuous output current of 2.7 A and a 110% overload rating support stable motor control under varying HVAC demand. Six digital inputs and two relay outputs make the drive especially effective for flexible building automation integration.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P1K5T6E is a variable frequency drive manufactured by Danfoss for the VLT FC 102 HVAC Drives series, a line tailored to air-handling and fluid-movement tasks in commercial facilities. Installed between the mains supply and an induction motor, the unit converts fixed utility power into a controlled waveform that regulates shaft speed in response to building-management commands. This capability lets ventilation, chiller, or booster-pump systems maintain setpoints with lower energy use and smoother starts than conventional across-the-line starters.
Electrically, the drive is configured for three-phase power and can support a maximum motor load of 1.5 kW, which corresponds to 2.0 hp. The continuous input and output currents are both rated at 2.7 A, ensuring balanced thermal loading of the rectifier and inverter sections. For transient demand, the current ceiling rises to 3.0 A for 60 seconds, resulting in an overload rating of 110% that may be used once per 10-minute duty cycle. This overload capacity allows fans to overcome static inertia or brief periods of high pressure without exceeding winding limits or tripping upstream protection. The controlled output also reduces mechanical stress on connected equipment during acceleration and deceleration.
The control card provides 6 digital inputs for fixed-speed selections or external interlocks and 2 analog inputs for proportional flow or temperature references. One analog output mirrors process variables to a meter or building management system, allowing external equipment to monitor operating conditions. Two pulse inputs capture tachometer or flow-switch feedback, while 2 relay outputs with Form C contacts handle starter interlocks at currents up to 2 A. Internal switching and control electronics dissipate 65 W, so the enclosure airflow must remove the resulting heat. These interface resources allow the drive to receive operating commands, monitor process signals, and control auxiliary equipment without requiring a separate signal converter.
