FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
13 Seconds
The FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX is a VLT HVAC Drive manufactured by Danfoss as part of the VLT FC 102 HVAC Drives series. It operates on three phase power at 380 to 480 VAC and features a protection level of IP55 / Type 12. The drive includes an RFI filter rated at Class A1/B and comes with a graphical local control panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX is an AC variable-frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It regulates induction-motor speed in ventilation, chiller, and pumping systems so building-management controls can match airflow or water flow to actual demand. Variable-speed operation can reduce unnecessary motor output when the connected HVAC equipment is operating below its maximum capacity. The drive also provides controlled acceleration and deceleration, helping motors respond smoothly to changing process commands.
The drive accepts a three-phase supply of 380–480 VAC, while three-phase power distributes the electrical load across the incoming phases. Its IP55 / Type 12 enclosure protects internal components against dust and directed water, allowing installation in suitable plant rooms without an additional protective cabinet. Conducted electrical noise is limited by an integrated RFI Class A1/B (C1) filter, which helps reduce interference on the connected supply network. A front-mounted graphical local control panel displays operating values, parameters, alarms, and trend information without requiring a separate interface device. The panel also provides direct access to drive settings when local operation or diagnostic review is required. The housing uses standard cable entries with a pre-punched entry plate, supporting conventional routing for supply, motor, and control wiring.
The listed A, B, C, C0, C1, and D option positions are empty, so this configuration does not include additional option modules. Adaptation B is set to no adaptation, and no added mains accessory is included in the configuration. The drive has no brake chopper, so applications requiring regenerative braking need compatible external braking equipment rather than a resistor connected directly to the drive. It uses uncoated printed circuit boards, which should be protected from corrosive gases, conductive contamination, and excessive moisture. The installed software is the latest standard release supplied for this configuration. A standard language pack provides multilingual menu access through the graphical control panel for local setup, monitoring, and fault review.
Frequently Asked Questions about FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX:
Q: What type of power phase does the FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX require?
A: This drive is designed for three-phase power operation.
Q: What is the supported mains voltage for the FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX?
A: The mains voltage supported by this model ranges from 380 to 480 VAC.
Q: What is the protection rating of the FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX HVAC drive?
A: This drive features a protection level of IP55 / Type 12.
Q: What type of local control panel does the FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX use?
A: The unit is equipped with a Graphical Local Control Panel for user interface.
Q: What level of RFI filtering is provided on the FC-102P1K1T4E55H3XGXXXXSXXXXAXBXCXXXXDX drive?
A: It comes with an RFI filter rated at Class A1/B (C1).
