FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
20 Seconds
The Danfoss FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX is part of the VLT FC 102 HVAC Drives series, designed for use with three phase power and a mains voltage range of 380 to 480 VAC. It features an IP55/Type 12 protection level, a built-in RFI filter, and includes a graphical local control panel.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX is a variable frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It is intended for air-handling and pumping systems in which automated speed regulation can improve energy efficiency and maintain stable operation. By converting fixed-frequency line power into a variable-frequency output, the drive allows a building-management controller to adjust motor speed according to real-time airflow, pressure, or water-circulation demands. This control method is suitable for industrial and commercial facilities that require motors to operate across changing load conditions rather than continuously running at full speed.
The power section accepts three-phase power at 380–480 VAC, allowing connection to commonly used low-voltage electrical networks without a separate transformer. Its IP55 / Type 12 enclosure protects the internal electronics from dust and low-pressure water jets, supporting wall mounting in suitable mechanical rooms. Conducted emissions are reduced by an integrated RFI filter, which helps limit electromagnetic interference near sensitive HVAC controls and sensors. Local access is provided through a graphical local control panel with a multiline display and soft keys for entering parameters, reviewing operating values, and responding to drive messages. The accessible interface allows operating settings to be adjusted directly at the unit without requiring a separate computer for routine setup.
The drive is supplied with the latest standard software release, providing the normal control functions available for this model. A Standard Language Pack stores multilingual interface text so menus and operating messages can be displayed in supported languages. The unit has no brake chopper, so it cannot route regenerated energy to an external braking resistor during rapid deceleration. Motor and load behavior must therefore be considered when setting stopping ramps, particularly in systems with significant rotating inertia or overhauling loads. The drive uses uncoated printed circuit boards, so the installation area should remain within normal HVAC humidity conditions and should not expose the electronics to condensation, corrosive gases, or conductive airborne contamination.
Frequently Asked Questions about FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX:
Q: What type of power phase does the FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX support?
A: The FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX is designed for use with three phase power supplies.
Q: What is the supported mains voltage range for this Danfoss VLT FC 102 drive?
A: This model operates on mains voltages ranging from 380 to 480 VAC.
Q: What protection level is offered by this Danfoss VLT drive?
A: The FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX provides IP55 / Type 12 protection, making it resistant to dust and water jets.
Q: What type of control panel comes with the FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX?
A: A graphical local control panel (LCP) is included on this model for intuitive user interface and operation.
Q: Does the FC-102P1K1T4E55H2XGX7SXSXXXXAXBXCXXXXDX include an RFI filter?
A: This unit features a built-in RFI filter for electromagnetic interference reduction.
