Product Description:

The FC-102P1K1T4E20H1XGXXXXSXXXXAXBXCXXXXDX is a variable frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. In building automation, it scales the speed of fans, pumps, and compressors so that airflow and coolant flow follow actual demand instead of running continuously at full speed. That operating method helps ventilation and fluid-handling equipment respond more smoothly to changing load conditions throughout a building. It is suited to applications where motor output needs to track occupancy, pressure, or temperature changes with steady speed control.

The power section accepts 380 - 480 VAC on three-phase power lines, enabling direct connection to standard industrial mains. Normal cabinet mounting for A, B, or C frames positions the heat sink inside the enclosure, while the IP20 chassis rating limits finger access and relies on the cabinet for additional enclosure protection. Conducted emissions are attenuated by the built-in RFI Class A1/B (C1) filter so the drive can operate next to sensitive building-management electronics. The boards use uncoated PCBs, so the drive is better suited to clean, dry enclosures than corrosive or high-humidity areas. No brake chopper is installed, and the mains, A, B, D, C0, and C1 option slots, along with the C software bay, are left empty for a baseline electrical configuration.

Operator interaction occurs through the front-mounted graphical local control panel, allowing local start, stop, and parameter edits without external tools. Power and control wiring pass through standard cable entries, and mechanical adaptation B uses no additional adaptation, so no extra gland plates are required. Menus are supplied by the standard language pack, and all functions run on the vendor's latest standard software release. The display presents operating values and menu selections at the drive, which reduces the need for a separate external keypad during routine setup and adjustment.