FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0 Danfoss
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
46 Seconds
The Danfoss FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0 is part of the VLT FC 102 HVAC Drives series. It has a power rating of 18.5 kW (25 HP) and operates with a three phase 380 - 480 VAC input. This drive includes a graphical local control panel, IP21 protection, and an MCB-107 24V DC backup option for dry room mounting.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0 is an AC variable-frequency drive produced by Danfoss for the VLT FC 102 HVAC Drives series. It is intended for air-handling units, pumps, chillers, and other motor-driven equipment used in industrial automation and commercial climate-control systems. In these applications, the drive adjusts motor speed to match building demand, helping reduce energy use while maintaining temperature and airflow setpoints. Its HVAC-focused controls support variable-speed operation where load requirements change throughout the day.
The inverter delivers a continuous power output of 18.5 kW, equivalent to 25 HP, and accepts mains power from 380–480 VAC on a three-phase power network. Its IP21 / Type 1 protection permits installation in conditioned electrical rooms where the unit remains protected from dripping water and accidental contact with internal components. The integrated EMC circuit is rated for RFI Class A1/B (C1), providing suppression suitable for the applicable residential and light-industrial emission limits. The drive does not include an internal brake chopper, so an external braking arrangement is required when the application produces substantial regenerative energy. Cooling air passes through the rear heat sink to remove heat from the power electronics. The drive supports dry-room mounting with the applicable B through E frame sizes.
Auxiliary control power is provided by the MCB-107 24 V DC backup board, which keeps the control electronics active during mains interruptions so operating information remains available. Setpoints, alarms, and operating data appear on the graphical local control panel, allowing direct access to the drive’s primary control and monitoring functions. Field wiring passes through standard cable entries, providing conventional routing for mains, motor, and control conductors. The printed circuit boards do not have conformal coating, so the drive is intended for clean electrical rooms with controlled exposure to moisture and airborne contaminants.
Frequently Asked Questions about FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0:
Q: What is the power rating of the FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0?
A: This drive supports a power rating of 18.5 kW for demanding HVAC operations.
Q: What mains voltage does the FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0 support?
A: The FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0 operates with a mains voltage range of 380 to 480 VAC.
Q: What is the protection level of the Danfoss FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0?
A: This model features a protection level of IP21 (Type 1), providing basic protection against ingress of solid objects and vertical dripping water.
Q: What type of control panel is provided with the FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0?
A: The drive comes with a Graphical Local Control Panel (LCP) for intuitive operation and configuration.
Q: What backup option is included in the FC-102P18KT4E21H1XGXXXXSXXXXAXBXCXXXXD0?
A: It is equipped with an MCB-107 24V DC backup option, ensuring crucial backup power for safe operation.
